The LIMESBASE is the most affordable model in the Limes series, offering an entry point into online water hardness monitoring. Limes hardness control devices enable cost-effective monitoring of reverse osmosis systems with reliable chemical analysis.
- Reliable and accurate monitoring of water hardness through the use of a laboratory-calibrated indicator.
- Monitoring of a defined limit value determined by the LHV indicator used.
- No delayed response compared to a resin-based sensor.
- No calibration and no drift effects compared to an electrode measurement.
- No wear or regeneration of the sensor is necessary.
- Separate connection cables for power supply, relay and input contact.
- Status indicator via four LEDs for limit compliance, analysis status, device status and pending service.
Product information LIMESBASE
- LED status indicator
- language-neutral
- First value suppression to prevent false alarms
- Automatic interval operation: Limit value check of the system every 10 minutes.
- Connections:
- 2 potential-free outputs:
- Exceeding the limit
- Device malfunction
- 2 potential-free outputs:
- Easily upgradeable to LIMESPLUS if needed
