Key Features

• Battery powered, comprehensive water
quality monitoring solution suitable for
portable or permanent installation
• Provides early warning of water quality
issues, e.g. Chlorine depletion through the
network
• User exchangeable array of water quality
sensors
• Solenoid controlled flow reducing water
sample volumes / runoff
• Optional pressure and flow recording inputs
• Data and threshold alarms transmitted
over cellular networks
• Easy to install in the distribution network
e.g. to an existing hydrant
• Recorded data aids in predicting burst
events
• Battery powered greater than 5+ years
depending on mode of configuration
• Protected against water ingress

Technical Specifications
Required Flow: Controlled to 0.2 LPM during measurements
Flow Chamber Inlet Pressure: 11-42 m (1-4 bar)
Sensor Output RS-485
Available Sensors:
Parameter and Range Resolution
Free Chlorine 0-5.00ppm 0.01ppm
Conductivity 0-2000uS 1uS
pH 0-12pH 0.01pH
Turbidity 0-40.00NTU 0.01 NTU
Pressure 0-300 PSIG (0-20 Bar) +/-0.5% or +/-0.1%
Other sensor types or configurations are available on request.