BES0300 BES Square version with 40 mm height for potentially explosive atmospheres

Manufacturer: Balluff

Inductive sensor

BES Q40KFU-GNX35F-S92G-EEX

BES0300

1) Active surface

NAMUR (analog) 35.00 mm

Non embeddable

Connector, M12x1-S92

General attributes :

Approvals / Conformity : CE

FM

cCSAus

EAC

Basic standard : IEC 60947-5-6

EN 61241-11

EN 61241-0

EN 60079-26

EN 60079-11

EN 60079-0

Enclosure Type per IEC 60529 : IP67

Explosion proofness : BVS 05 ATEX E 162 X

Ex II 1 D Ex iaD 20 T 90 ?C / Ta: -20 ?C

to +70 ?C

Connection to approved intrinsically safe

circuits with max. values U=15 V/I=50 mA

Ex II 2G Ex ia IIC T6 / Ta: -20 ?C bis

+70 ?C

Function indicator : Yes

Polarity reversal protected : No

Power indicator : No

MTTF (40?C) : 2930 a

Electrical attributes :

For use only with suitable approved switching amplifier.

Connection type : Connector

Current draw damped max. : 1.0 mA

Current draw undamped min. : 2.10 mA

Eff. operating voltage Ue DC : 8.2 V

Electrical version : DC, direct current

Internal capacitance Ci max. : 220 nF

Internal inductivity Li max. : 0.710 mH

Operating voltage UB max. DC [V] : 9.0 V

Operating voltage UB min. DC [V] : 7.7 V

Power Pi max. : 120.0 mW

Rated insulation voltage Ui : 75 VDC

Rated series resistance Rv : 1000 Ohm

Switching freq. f max. (at Ue) : 100 Hz

Switching function : NAMUR (analog)

Mechanical attributes :

Ambient temperature Ta max. : 70 ?C

Ambient temperature Ta min. : -20 ?C

Assured operating distance Sa : 28.00 mm

Connector type : M12x1-S92

Depth : 66.0 mm

Eff. operating distance Sr : 35.00 mm

Height (small side) : 40.0 mm

Housing material : PPE / PPS

Mech. installation condition : Non embeddable

Rated operating distance Sn [mm] : 35.00 mm

Sensing face material : PPE

Switching distance diff. max. : 15.00 %

Width (long side) : 40.0 mm

Remarks : The operating manual document number 844836 must be followed.For further information on MTTF/B10d, please refer to the MTTF / B10d Certificate.Specification of the MTTF value and the B10d value do not represent any binding qualityand/or life expectancy guarantees.