柔佛锟斤拷Panasonic FP2SH CPU UNIT. AFP2231 FP2-C2

FP2-C2/AFP2231 NAIS FP2SH CPU UNIT 60K steps

Product Details

Advanced Control Functions

High-speed counter function (all series)The built-in high-speed counter function supports four modes: two-phase input, UP, DOWN, and UP/DOWN.The FP1 can read the input regardless of the scan time.

Application: Pattern output function (all series)This function allows the setting of a maximum ofeight output patterns with 15 level settings of thehigh-speed counter. Can also be applied to multi-stage speed control with use of an inverter.

Pulse output function (transistor output type)This function allows the output of a direct pulse (45 Hz to 4.9 k Hz) from the FP1. In combination with a drive, amotor can be controlled. As direct pulse is possible, an additional positioning controller is not necessary. As the C56and C72 series have two pulse outputs, they also support motor drives with one input for forward and the other inputfor reverse driving. To prevent incorrect forward/reverse driving, create an interlock circuit outside of the FP1.

Interrupt input function (C24, C40, C56, and C72 series)This function executes an interrupt program immediately after an external interrupt input (minimum pulse width of0.2 ms) occurs, regardless of the input timing. It enables high-speed processing at a fixed timing and is not affectedby scan time. Therefore, it is useful when performing control which would be disrupted by variations in processingtime due to such factors as timing synchronization.