Supply voltage
Load voltage L+
● Rated value (DC)		120 V
Load voltage L1
● Rated value (AC)		230 V
Input current
from supply voltage L+, max.		125 mA
from backplane bus 5 V DC, max.		40 mA
Power loss
Power loss, typ.		3.2 W
Digital outputs
Number of digital outputs		8; Relays
Short-circuit protection		No; to be provided externally
Controlling a digital input		Yes
Switching capacity of the outputs
● on lamp load, max.		1 500 W; 230 V AC
● Low energy/fluorescent lamps with electronic control gear		10x 58 W
● Fluorescent tubes, conventionally compensated		1x 58 W
● Fluorescent tubes, uncompensated		10x 58 W
Output current
● for signal "1" rated value		5 A
● for signal "1" minimum load current		5 mA
Parallel switching of two outputs
● for uprating		No
● for redundant control of a load		Yes
Switching frequency
● with resistive load, max.		2 Hz
● with inductive load, max.		0.5 Hz
● With inductive load (to IEC 60947-5-1, DC13/AC15), max.		0.5 Hz
● on lamp load, max.		2 Hz
● mechanical, max.		10 Hz
Total current of the outputs (per group)
horizontal installation
— up to 60 °C, max.		5 A
vertical installation
— up to 40 °C, max.		5 A
Relay outputs
● Rated supply voltage of relay coil L+ (DC)		24 V
● Contact connection (internal)		No
● Number of operating cycles, max.		300 000; 300 000 (24 V DC, at 2 A); 200 000 (120 V AC, at 3 A); 100 000 (230 V AC, at 3 A)
Switching capacity of contacts
— with inductive load, max.		3 A; 3 A (230 V DC), 2 A (24 V AC)
— with resistive load, max.		8 A; 8 A (230 V DC), 5 A (24 V AC)
— Thermal continuous current, max.		8 A
Cable length
● shielded, max.		1 000 m
● unshielded, max.		600 m
Interrupts/diagnostics/status information
Alarms		No
Diagnostics function		No
Alarms
● Diagnostic alarm		No
Diagnoses
● Wire-break		No
● Short-circuit		No
● Fuse blown		No
● missing load voltage		No
Diagnostics indication LED
● Rated load voltage PWR (green)		No
● Fuse OK FSG (green)		No
● Status indicator digital output (green)		Yes
Potential separation
Potential separation digital outputs
● between the channels		Yes
● between the channels, in groups of		1
● between the channels and backplane bus		Yes; Optocoupler
Isolation
Isolation tested with		2 000 V AC
connection method
required front connector		40-pin
Dimensions
Width		40 mm
Height		125 mm
Depth		120 mm
Weights
Weight, approx.		320 g