- Up to 10 times better stability
- Extremely tight tolerances of the slide through the round Twin Rail System
- The slide has no contact with the main body of the machine. The whole construction is connected only by the highly precise and extremely stable rail system
- Reduced friction / less wear
- Low maintenance / better reliabilty
- Improved cutter life
- Reduced cutter breakage
- Improved ole tolerances
- Improved hole surface quality
- Up to 110mm cutting depth possible already with small machines
The sensor detect how well the magnet keeps the machines on the ground.
- It is directly connected to the engine.
- If the sensor is illuminating ''RED'', the ground is dirty (rust, varnish residues, chips),the material is thinner than 6 mm or the feed rate is to high
- The machines does not have a safe stand. The engine does not start or turns off
- If the sensor is illuminating ''Green'', the magnetic holding force is optimal and the use of the machine is safe
| Model | KA 50 BLUE-MAG |
| Motor Power Watts | 1150 W |
| Tool Holder | Morse Taper 2 with Weldon 19 mm (3/4'') |
| Coolant Supply | Internal, Automatic |
| Stroke | 170 mm 6.5/8'' |
| Voltage | 230V / 100V |
| Magnetic Adhesion | 1250kg / 2755lb |
| Magnetic Foot | 87 x 180mm Starr Fixed |
| Core Drilling | 12 - 50 mm (5/32'' - 1.3/32'') |
| Twist Drilling | 3 - 32 mm (3/16'' - 29/32'') |
| Countersinking | 10 - 40 mm (3/8'' - 1.37/64'') |
| Weight | 13 kg, 28.00 lb |
Pictures are for illustration purposes only, actual may vary. Specifications are subject to change without prior notice.
