•Offline PCBA cleaning machine is an economical and efficient batch cleaning system designed to remove various residues from electronic products. These residues include, but are not limited to, water-soluble residues, RMA (medium-activity rosin), no-clean lead-free fluxes, plating salts, fingerprints, dust, and loose solder balls. This cleaning machine utilizes the American TDC offline medium-low pressure high-flow cleaning process concept, characterized by high cleaning efficiency and low cost.
•The nozzles and spray pipes are designed for easy installation and maintenance, making it suitable for small to medium production volumes of PCBA flux cleaning equipment. The typical batch cleaning process allows to perform cleaning, rinsing, and drying all within a single chamber. It enhances cleaning quality and accommodates a variety of PCBA cleaning needs.
•The chamber and tank capacities can be adjusted to reduce the usage and consumption of cleaning chemicals. This machine is known for its competitive pricing, good performance, excellent cleaning results, and high cost-effectiveness, making it one of the most formidable competitors in the domestic offline cleaning machine market. The overall material of the equipment is stainless steel, which resists chemical corrosion and remains like new over time. The entire machine uses PLC and a touch screen for user-friendly control, making the operating system intuitive and easy to use.
Specification:
Specification:
| No. | Item Name | Technical Specifications |
| 1 | Machine Dimensions | L1200 × W1100 × H1830 (mm) |
| 2 | Cleaning Chamber Size | L690 x W620 x H715 (mm) |
| 3 | Cleaning Basket Size | 610 x W560 x H100 (mm) double-layer design |
| 4 | Machine Power | Approximately 24kW |
| 5 | Control Method | Touchscreen + PLC Control |
| 6 | Machine Material | 304 Stainless Steel |
| 7 | Conveyor Belt Material | 304 Stainless Steel |
| 8 | Power Requirements | AC380V 50Hz 65A |
| 9 | Air Requirements | 0.45Mpa ~ 0.7Mpa |
| 10 | Weight | Approximately 600kg |
| 11 | DI Water Quality Requirement | > 15MΩ |
| 12 | DI Water Inflow Requirement | 0.5 m³/h |
| 13 | Noise Level | < 70 dB |
| 14 | Spray Pressure | 30-40 psi |
| 15 | Product Thickness (Max/Min) | 0-100 mm |
| 16 | Product Weight | Less than 10kg |
| 17 | Chemical Washing Tank Temperature | 25-75 |
| 18 | Drying Temperature | Up to 99 |
| 19 | Spray Pipe Installation Method | Quick connector for easy replacement |
| 20 | Automatic Liquid Replenishment System | Yes (optional) |
| 21 | Water Pipe Installation Method | Quick connection for easy maintenance |
| 22 | Chemical Liquid Recycling and Filtration | 0.45μm (filters out small particles of solder paste, rosin, flux, etc.) |
| 23 | DI Water Discharge Filtration | 0.45μm (filters out small particles of solder paste, rosin, flux, etc.) |
