High-Speed and High-Precision G5 Series MECHATROLINK-II Communications with the Controller
- Data transfer using MECHATROLINK-II Communications: All control data that can be interfaced between the Servo Driver and the Controller is transmitted using data communications. This enables maximizing the Servomotor performance without restricting the transmission performance of the control signals.
- Having a communications module built into the Servo Driver significantly saves space in the control panel.
| Item | Specifications | ||
| Ambient operating temperature and operating humidity | 0 to 55°C, 85% max. (with no condensation) | ||
| Storage ambient temperature and humidity | -20 to 65°C, 85% max. (with no condensation) | ||
| Operating and storage atmosphere | No corrosive gases | ||
| Vibration resistance | 10 to 60 Hz and at an acceleration of 5.88 m/s2 or less (Not to be run continuously at a resonance point) | ||
| Insulation resistance | Between power supply terminals/power terminals and FG terminal: 0.5 MW min. (at 500 VDC) | ||
| Dielectric strength | Between power supply/power line terminals and FG terminal: 1,500 VAC for 1 min at 50/60 Hz | ||
| Protective structure | Built into panel | ||
| International standard | EU Directives and UK legislation |
EMC | EN 55011, EN 61000-6-2, IEC 61800-3 |
| Low Voltage | EN 61800-5-1 | ||
| Machinery | EN954-1 (Cat.3), EN ISO 13849-1: 2008 (Category 3) (PLc,d), ISO 13849-1: 2006 (Category 3) (PLc,d), EN61508 (SIL2), EN62061 (SIL2), EN61800-5-2 (STO), IEC61326-3-1 (SIL2) |
||
| UL standards | UL 508C | ||
| CSA standards | CSA C22.2 No. 14 | ||
| Korean Radio Regulations (KC) | Certified | ||
