USAGE :


DIRECTION TO USE :

1. Open the front cover by pressing the button on top of the dispenser.
2. Ensure the switch is in the “OFF” position. Insert 2AA/LR6 batteries. Ensure the batteries are inserted correctly, aligning the positive (+) and negative (-) terminals as indicated.
3. Before inserting the aerosol refill, please check that the internal mechanism is in the correct position (refer to the drawing). Otherwise, push the mechanism upward with your finger. Insert the aerosol refill on the device's base, spray nozzle facing outward.
4. Set the light sensor switch to the desired level.
5. Set the timer to the desired spray interval. Keep the dispenser away from your face while operating it. Ensure the nozzle is pointed outward before altering the time switch. Once the dispenser is turned "ON" a blinking light (at 3-5 second intervals) indicates that it is functioning.
6. Close the cover and place the dispenser in an appropriate location.

AUTOMATIC SPRAY DISPENSER INSTRUCTIONS :
Read the precautions and follow the directions carefully.
1. Keep the device out of reach of children.
2. When the device is switched to "ON", it automatically sprays once right away. Therefore, please keep the device nozzle away from your face and eyes to prevent the spray. If it happens, kindly wash it off with plenty of water.
3. Do not place the device at the place of food processing or dispatching
4. There is pressure inside the aerosol refill can; please avoid dropping and extruding.
5. Aerosol refill is a flammable product; avoid placing it near a fire or in a place with high temperatures.
6. If the room or house has been closed for a long time, please ensure proper air circulation before and after using the product.
7. If the device will not be used for a long period, remove the batteries and aerosol refill.  Then, keep the device away from sunlight and moisture.
8. Batteries need to be replaced when the green light stop blinking.

FIXING INSTRUCTIONS :
Ensure the surface is smooth, clean, dry, free from grease, and undamaged. Use either a screw fixing or the adhesive hook. Peel off the film from the adhesive pad on the hook. Place the hook on the surface and press firmly for 30 seconds. Wait for 20 minutes before hanging the device. DO NOT use on wallpapers, varnished, laminated, or unsound painted surfaces. Once placed, the hook can’t be repositioned. Moving the hook is likely to damage the surface. If you are not sure that your wall surface can support the device, please use the device freestanding on a suitable flat surface.