Features
• The MT574C offers both automatic and manual ranging
• Measure Ohms to determine resistance of a coil or spark plug wire
• Use the diode function to test the diode pack on a typical alternator
• Use DC Voltage ranges to verify proper voltage level is arriving at a sensor or circuit
• Large, easy-to-read, 4000 count LCD display with low battery indication
• Lock readings on display with Data Hold
• Measure AC Voltage signals on digital MAF sensors plus wheel and vehicle speed sensors
• Measure DC current to determine presence of a parasitic load
• Added protection against drops and the elements with included rubber boot
• Safety! cULus 3111 Listed
• Meets CE and IEC® 1010 safety standards
Specifications
Capacitance No
RPM EEDMRPMG (opt.)
Low Pass Filter (LPF) No
Case or Zipper Pouch EEDM504B4 (opt.)
Adjustable Trigger Level No
Temperature EEDM506C (opt.)
AC Volts 600
Micro Amps 4,000
Country of Origin KOR
Dimensions, inches 6 x 3 x 2
Noise Reduction Circuit No
mS Pulse Width No
CAT Rating CATIII 600 V
Backlight No
Auto Shut-off Yes
Test Leads EEDM504B3
Certificate of Calibration Model MT574CCRT
AC Amps, mA 400
DC Amps 400 mA
UL® Listed cULus 3111
Glitch Capture No
Insulation Test No
Analog Bar Graph No
Resistance, ohms 40M
Basic DC Accuracy .3% (+3)
Data Hold Yes
Auto Range Yes
Duty/Dwell No
True RMS (Root Mean Square) No
Display Count 4,000
Fuses EEDMFUSE-1
Blown Fuse Identifier No
Comp. Output (USB) No
Min/Max Yes
DC Volts 600
Easy Open Battery and Fuse Door No
Color Screen No
Frequency No
