Argon Piston Flowmeter Regulator - Newgas

An argon flowmeter regulator is a device that is used to control the flow of argon gas during TIG welding. Argon is a shielding gas that is used to protect the weld from oxidation and contamination. The flowmeter regulator allows the welder to adjust the flow of argon to ensure that the weld is properly protected.

Argon flowmeter regulators typically have two main components: a pressure regulator and a flowmeter. The pressure regulator reduces the pressure of the argon gas from the cylinder to a safe level. The flowmeter allows the welder to control the flow of argon gas.

The flowmeter is a calibrated device that measures the flow of argon gas in liters per minute (lpm). The flowmeter is typically calibrated in 10 lpm increments. The welder can adjust the flowmeter to the desired flow rate by turning the knob on the flowmeter.

Argon flowmeter regulators are an important safety device. They help to prevent the accidental release of high-pressure argon gas, which could cause serious injury or death. Argon flowmeter regulators should be used only by trained personnel.

Here are some of the benefits of using an argon flowmeter regulator:

• Controls the flow of argon gas to protect the weld from oxidation and contamination
• Provides a means of measuring the flow of argon gas
• Helps to prevent the accidental release of high-pressure argon gas
• Is an important safety device

If you are using an argon flowmeter regulator, it is important to follow the manufacturer's instructions carefully. You should also inspect the regulator regularly for signs of damage or wear. If you notice any problems with the regulator, you should stop using it and contact the manufacturer or your welding supplier.

Here are some safety tips for using an argon flowmeter regulator:

• Always use an argon flowmeter regulator that is in good working order.
• Never use an argon flowmeter regulator that has been damaged or is leaking.
• Keep the argon flowmeter regulator out of the reach of children and pets.
• Do not smoke or use any open flames near an argon flowmeter regulator.
• Do not use an argon flowmeter regulator in a flammable or explosive environment.

By following these safety tips, you can help to ensure the safe use of argon flowmeter regulators.

Here are some of the factors to consider when choosing an argon flowmeter regulator:

• The type of welding you will be doing
• The size of the argon gas cylinder you will be using
• The desired flow rate of argon gas
• The price of the argon flowmeter regulator