Size 75g Tube
Colour White
Full Cure Time Cures in 8 hours, best to be left for 24 hours
Technology Neutral Cure Silicone
Use Interior, Exterior
Where can this product be used?
-Shower screens
-Baths
-Spas
-Sinks
-Plumbing fixtures
-What materials is this product suitable for?
-Ceramic, glazed and porcelain fixtures
-Metal, copper and brass fittings
-Plastic laminates
-Rubber
-Glass
-Stainless steel
-Concrete and grouts
-Use in a well ventilated area. Avoid contact with skin and eyes.
Ensure surfaces are clean (can be applied on wet or damp surface, its ideal if the surface is dry).
Apply a layer of masking tape along the perimeter line where Selleys all clear is to be applier.
Pierce tube with reversed side of cap.
Attach the supplied nozzle on the pierced tube and cut the tip of nozzle at 45 degree angle.
Apply on needed surface and, smoothen with a scraper or spatula.
Once applied, peel of the masking taped along the perimeters for a clean finishing & leave the sealant to dry for at least 2 hours before using the area.
Limitations:
Not paintable. Complete painting 7 days prior to applying sealant.
Not suitable for building materials that bleed oils or solvents, such as impregnated wood.
Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
Not suitable for aquariums.
Not suitable for food or drinking water contact.
Not suitable for permanent water immersion.
For neater joints, mask sides before applying sealant and remove tape before sealant skins.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
Work in sections that can be completed before sealant skins.
Tooling off and tape removal must be completed before skinning occurs, or a rough surface may result. Working in sections allows for a better finish.
While the sealant is still wet, clean off excess sealant with a cloth soaked with acetone
Cured product can be removed by cutting and scraping
Colour White
Full Cure Time Cures in 8 hours, best to be left for 24 hours
Technology Neutral Cure Silicone
Use Interior, Exterior
Where can this product be used?
-Shower screens
-Baths
-Spas
-Sinks
-Plumbing fixtures
-What materials is this product suitable for?
-Ceramic, glazed and porcelain fixtures
-Metal, copper and brass fittings
-Plastic laminates
-Rubber
-Glass
-Stainless steel
-Concrete and grouts
-Use in a well ventilated area. Avoid contact with skin and eyes.
Ensure surfaces are clean (can be applied on wet or damp surface, its ideal if the surface is dry).
Apply a layer of masking tape along the perimeter line where Selleys all clear is to be applier.
Pierce tube with reversed side of cap.
Attach the supplied nozzle on the pierced tube and cut the tip of nozzle at 45 degree angle.
Apply on needed surface and, smoothen with a scraper or spatula.
Once applied, peel of the masking taped along the perimeters for a clean finishing & leave the sealant to dry for at least 2 hours before using the area.
Limitations:
Not paintable. Complete painting 7 days prior to applying sealant.
Not suitable for building materials that bleed oils or solvents, such as impregnated wood.
Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
Not suitable for aquariums.
Not suitable for food or drinking water contact.
Not suitable for permanent water immersion.
For neater joints, mask sides before applying sealant and remove tape before sealant skins.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
Work in sections that can be completed before sealant skins.
Tooling off and tape removal must be completed before skinning occurs, or a rough surface may result. Working in sections allows for a better finish.
While the sealant is still wet, clean off excess sealant with a cloth soaked with acetone
Cured product can be removed by cutting and scraping
