Function

Wipers are designed to keep dust, dirt, sand and others off the rod and the sealing and

guiding elements, avoiding abrasive damage caused by external contamination.

Features

•  The profile is designed with two geometric different lips for wiping off any dirt on

the rod and to reduce the residual oil film on the medium side.

•  The wiper consists of a PTFE wiping part and two O-Rings as preload element,

maintaining contact pressure on the rod.

•  Due to the use of an O-Ring the wiper is able to compensate deflections of the rod.
•  Mainly used in combination with rod seal RS09B.
•  Pressure should be limited to 15bar.
•  For housings acc. to ISO 6195 Type D.

Application

Reciprocation rods in hydraulic cylinders, swivelling and coiling rods, plungers.

Installation

Snap-in installation for wipers bigger 25mm otherwise a partite groove is recommended.

A large insertion chamfer needs to be provided (angle 20-30°).