请登录后使用此功能。
您可以使用此功能将商品添加到您的收藏列表。
关闭
请登录后使用此功能。
您可以使用此功能将公司添加到您的收藏夹列表。
关闭
请登录后使用此功能。
您可以使用此功能将公司添加到您的询问车。
关闭
每日登录奖励
恭喜!
你获得了今天的每日登录奖励!
5 NP Point这是您获得的奖励!
查看您的每日登录奖励
确保每天回来登入以获更多的奖励!
谢谢!
Scan and Whatsapp Me
Note: Some mobile phone default QR scanners cannot scan to open the WhatsApp App directly.
Cancel
营业
时间
星期一 - 星期六 8:00 AM - 5:00 PM
星期日 7:30 AM - 7:30 AM
我们在
公共假期休息
营业
休息
森美兰,波德申 - HARDEX PU FOAM SPRAY (HPU-30)
16-Apr-2025
HARDEX PU FOAM is a one component, ready to use multi-purpose polyurethane foam. It is fitted with a plastic adapter head for use with a foam application gun or a plastic applicator. The foam will expand and cure by moisture in the air. It is used in a wide range of building application. It has excellent filling and sealing capabilities with great mounting capacity, high thermal and acoustical insulation.
APPLICATION AREAS:
* Installing, fixing and insulating of door and window frames.
* Filling and sealing of gaps, joint, opening and cavities.
* Connecting of insulation materials and roof construction.
* Bonding and mounting.
* Insulating electrical outlets and water pipes.
* Excellent insulation for heat, cold and sound.
* Application temperature is between 5贑 to 35贑
* Packing purpose, wrapping valuable and fragile
commodities, shake-proof and anti-pressure.
BENEFITS:
* NON-SHRINK
* NON-SAGGING
* GOOD FILLING CAPACITY
* GOOD ADHESION TO A WIDE VARIETY OF SURFACES
* OZONE-FRIENDLY PROPELLANTS (CFC FREE)
DIRECTIONS:
1. Surface must be clean and free of dirt, grease or oil.
2. Moisten surfaces with a water sprayer prior to application.
3. Shake the aerosol can for at least 40 seconds.
4. Fit the straw on the adapter. Firmly screw the can on the adapter and turn the flow adjuster screw.
5. Fill the holes and cavities. Bottom up during application.
6. Foam will be tack free in about 10 minutes. Excess can be trimmed within 1 hour.
7. Fresh foam can be removed using acetone. Cured foam can only be removed mechanically.
SAFETY RECOMMENDATION:
* Do not beat spray or capor. In case of eye contact, flush
with water and get immediate medical attention.
* Use in well ventilated areas.
* Wear suitable protective clothing, gloves and goggles.
* Keep away from direct sunlight and do not expose to temperature over 50贑.
* Do not burn or pierce can even after use.
* Keep away from heat, sparks, flames and static electricity.
* Turn off all sources of ignition (pilot light etc.).
DISCLAIMER
All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, color, and other relevant characteristics.
发信息至 EKA Hardware Sdn Bhd