QUICKTOCTRACE
TOC measurement of (ultra-)pure water. It is a compact and intuitive analyzer with a short reaction time – first results are available within 30 seconds.
Its comparatively low initial cost and, due to its robustness, low operating costs increase the profitability of your manufacturing processes.
FEATURES AND BENEFITS
- Measuring range 0.1 to 1,000 ppb TOC
- Short reaction time → T90 within 30 seconds
- Continuous measurement (every 2 seconds)
- Userfriendly software interface with 8“ touch screen
- Remote service → connection to internet for service analysis
- Low operating costs → long lasting UV lamp
- Easy to maintain → easy to calibrate (1 time per year)
- Easy system validation with fully automatic SST (optional)
- Viewer → comprehensive data storage
APPLICATIONS
LAR’s TOC analyzer is suitable for a variety of applications and water types:
- pure water
- ultra pure water
- process water
- boiler feed water
- condensate return
OPTIONS
Options extend the functionality of the analyzer.
- Multi-stream measurement for up to 3 sample streams
- Calibration solutions
- SST-Kit
- Heat-exchanger for samples with > 50°C
HOUSINGS
The housing of the analyzer is characterized by the following specifications.
- Housing Stainless Steel IP 20 (standard), IP 54 (optional)
- Dimensions 300 x 500 x 200 mm (W x H x D)
- Weight ca. 7 kg
CONTINUOUS TOC MEASUREMENT BY MEANS OF UV OXIDATION AND DIFFERENTIAL CONDUCTIVITY MEASUREMENT.
The QuickTOCtrace is an online system working on the basis of the traditional continuous flow process with conductivity detection. UV oxidation using the “direct surface” process guarantees highest precision thanks to highly sensitive conductivity sensors. In differential conductivity measurement, the initial conductivity before oxidation, as well as the conductivity after the treatment of the sample, are measured. The TOC concentration results from the difference obtained from subtracting the first, lower conductivity measurement from the second, higher one. The QuickTOCtrace can thus reliably determine the parameter TOC in a measuring range of 0.1 – 1,000 ppb.
SYSTEM SUITABILITY TEST – SST.
The verification of the TOC result is carried out using periodical implementation of the system suitability test and complies with the standards prescribed by the US pharmacopoeia, as well as the European pharma regulation (European pharmacopoeia). QuickTOCtrace’s software enables a quick and simple initiation of the SST at any time and offers automatic data evaluation as well as automatic implementation of the testing procedure.
The automized functions of the SST allow a high standard of safety and minimized operation costs in controlling the water.
BR 21671 
VN 8720 
US 7697 
MY 4589 
IN 2881 
AR 2006 
CN 1622 
GB 1457 
