SETRA Model 32CS Intrinsically Safe Transducer

The Model 32CS is designed for heavy duty applications in hazardous locations requiring intrinsic safe, top of the line performance, reliability and stability at an affordable price.  The Model 32CS offers exceptional ±0.5% FS accuracy in pressure ranges from 75 PSI to 32,000 PSI and features an all welded stainless steel construction for a robust design and IP67 seal for moisture and humidity protection.  The Model 32CS offers a variety of different outputs, pressure connectors, and electrical connectors to satisfy the most challenging application requirements.  For ATEX/IECEx intrinsically safe pressure transducers, refer to Setra's 31IS and 32IS.

Built to Last - The Model 32CS are heavy duty pressure devices with long term stability, product reliability and accuracy built in. The compact welded stainless steel designs are constructed to protect the sensors in the most demanding of industrial environments. The Model 32CS provides a 3x overpressure (0-10k PSI) and a 2.5x overpressure (10k to 14.5k PSI) rating, ensuring that the sensor does not fail during unexpected pressure spikes. The electrical connectors are tested to an environmental protection specification of IP67 and above and a robust internal design ensures that the transducers can survive high levels of vibration. A high level of EMC protection allows the transmitters to perform to the most stringent of industrial standards and all devices are RoHS compliant.

Best in Class Price to Performance - Strain Gauge technology provides a very linear and predictable output signals over wide temperature ranges, which enables Setra to provide an inherently stable and accurate sensor element in high volume and at low cost. The Model 32CS sensors constructed using a highly sophisticated automation process, where the sensors are manufactured in a Class 100 clean room. To ensure best in class accuracy and long term stability, each sensing element is thermally compensated to an accuracy of less than 0.005%/°C prior to leaving the clean room for final assembly. Thermally compensating the unit ensures improved accuracy and simplified conditioning electronics; while eliminating the need for calibration over elevated temperatures as a transducer.

Unrivaled Quality - Setra understands the importance of quality in OEM applications, which is why we are always looking for ways to improve the quality rating of the product. Over the last two years, the Model 32CS failure rate is less than 0.1%, a quality rating unmatched by the competition. The worst thing that could happen to an engineer is to shut down their work because of quality issues, Setra takes this seriously which is why we have worked hard to ensure that product improvements are made to reduce quality issues to our customers.

 

• Class I, Division 1, Groups C & D
• Class I, Zone 0 Ex ia IIB T4 Ga
• Class I, Zone 0 AEx ia IIB T4 Ga
• No Oil Fill - Prevents Thermal Instability & Leakage
• Wide Choice of Pressure Ranges from 75 PSI up to 32,000 PSI
• ±0.5% FS Accuracy
• Small Footprint - Less than 1in. Diameter
• 40x FS Burst Pressure (Range Dependent)
• Reverse Wiring Protection
• CE & UL Approved, RoHS Compliant
• All Welded Stainless Steel Construction

The Model 32CS is designed for heavy duty applications in hazardous locations requiring intrinsic safe, top of the line performance, reliability and stability at an affordable price.  The Model 32CS offers exceptional ±0.5% FS accuracy in pressure ranges from 75 PSI to 32,000 PSI and features an all welded stainless steel construction for a robust design and IP67 seal for moisture and humidity protection.  The Model 32CS offers a variety of different outputs, pressure connectors, and electrical connectors to satisfy the most challenging application requirements.  For ATEX/IECEx intrinsically safe pressure transducers, refer to Setra's 31IS and 32IS.

Built to Last - The Model 32CS are heavy duty pressure devices with long term stability, product reliability and accuracy built in. The compact welded stainless steel designs are constructed to protect the sensors in the most demanding of industrial environments. The Model 32CS provides a 3x overpressure (0-10k PSI) and a 2.5x overpressure (10k to 14.5k PSI) rating, ensuring that the sensor does not fail during unexpected pressure spikes. The electrical connectors are tested to an environmental protection specification of IP67 and above and a robust internal design ensures that the transducers can survive high levels of vibration. A high level of EMC protection allows the transmitters to perform to the most stringent of industrial standards and all devices are RoHS compliant.

Best in Class Price to Performance - Strain Gauge technology provides a very linear and predictable output signals over wide temperature ranges, which enables Setra to provide an inherently stable and accurate sensor element in high volume and at low cost. The Model 32CS sensors constructed using a highly sophisticated automation process, where the sensors are manufactured in a Class 100 clean room. To ensure best in class accuracy and long term stability, each sensing element is thermally compensated to an accuracy of less than 0.005%/°C prior to leaving the clean room for final assembly. Thermally compensating the unit ensures improved accuracy and simplified conditioning electronics; while eliminating the need for calibration over elevated temperatures as a transducer.

Unrivaled Quality - Setra understands the importance of quality in OEM applications, which is why we are always looking for ways to improve the quality rating of the product. Over the last two years, the Model 32CS failure rate is less than 0.1%, a quality rating unmatched by the competition. The worst thing that could happen to an engineer is to shut down their work because of quality issues, Setra takes this seriously which is why we have worked hard to ensure that product improvements are made to reduce quality issues to our customers.