Jotamastic 90 product is tintable in a wide range of colours in Jotun's Multicolor Industry (MCI) system. It is specially designed for areas where optimum surface preparation is not possible or required and provides long-lasting protection in environments with high corrosivity. It can be used as a primer, midcoat, finish coat or as a single-coat system in atmospheric and immersed environments. Jotamastic 90 is suitable for use on properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. It can be applied at sub-zero surface temperatures.
Key features
- Surface-tolerant
- Tintable
- Short overcoating intervals
- Long lifetime in high corrosivity environments
- Robust and user friendly
- Contributes to green building standard credits
Technical details
-
Product Categories
Anticorrosive primersMaintenance primers
-
Technology
Epoxy mastic
-
Substrate
Carbon steelGalvanized steelStainless steelConcreteCoated surfacesShop primed steel
- MCI TintableYes
Downloads
Certificates and Approvals
Pre-qualified in accordance with NORSOK M-501 in selected systems.
Tested in accordance to LEED®.
Tested in accordance to BREEAM®.
Certified in accordance with IMO Res.288(87) – PSPC Crude Oil Tanks.
For more detailed and specific information about the standards, certificates and other documentation please see TDS or contact your local Jotun representative
US 13485 
GB 10741 
CA 8854 
AU 8790 
IE 4827 
NZ 3754 
BR 1944 
SG 1306 
