Temtop P600 Handheld PM2.5 PM10 Air Quality Monitor with Histogram

Temtop P600 is equipped with Temtop laser particle detector PMJG-200. The sensor features an imported processing chip and photosensitive element. Signals are collected and processed by the microprocessor chip and then output in digital format. The sensor is ideal to detect the concentration of different particles precisely in real-time can accurately detect indoor air quality.
The device also counts with Silicon Labs Si7020 temperature and humidity sensor which is an analog-digital converter With full factory calibration, the Si7020-A20-GM requires no additional RH/temperature calibration during PCB assembly.

Features:

• • This 3-IN-1 detector is exclusively designed for particles only. It monitoring PM2.5, PM10 and has the histogram function.
  • The high-precision laser particle sensor has up to 20,000 hours. Combined with the particle swarm optimization algorithm, it can accurately measure haze and smog particles as small as 0.3um, making particle measurement more accurate.
  • Easy to operate with simple system settings through few function buttons. Large TFT color LCD screen intelligently the testing results, easy and clear to readThe new histogram function can visually reflect the change on PM2.5 concentration within the last 12 hours.
  • 3 buttons for 3 functions; Simply press each function button on the front panel to enter the corresponding PM2.5 or PM10 or histogram info page.
  • Large TFT screen and rich display make it clear and easy to read data, even with a battery indicator light to help you check the battery at any time.
  • Application Scope: At the home, office, etc.

• Turn on/off the detector:

• Power indication:

• PM2.5 Button: Press it and the system will enter the PM2.5 index display interface.
• PM10 Button: Press it and the system will enter the PM10 index display interface.
• Curve Button: Press it and then the system will enter the recording curve display interface.
• Play/Stop Button: Under the mode of "Running", if you press it, the system will enter detection-pause mode and all values are maintained; Under the mode of "Hold", if you press this button, the system will reenter detection mode.

• Avoid using the detector in the environment to make sure the accuracy of test data.
• Avoid bump, strike drop.
• Do not cover the detection port and air outlet port when using the detector.
• Be cautious of cross-interference.

Specification