Castle / NK122
SONIK-S GA142S Safety Data-Logging Sound System, Class 1
SONIK GA142S (Class 1) Safety Data-logging Sound Meter c/w Calibrator (Dual level, Class 1) (Includes GA690 Barometer), dBdataPRO Noise Analysis Software & Cable, Protective System Carry Case and dBAir Rubber Case
Easy Operation and Setup
24+ Hours Battery Life
On-Going Warranty
Fully compliant to IES 61672-1:2013
Simultaneous Measurements
Multiple Applications
The SONIK-S helps you protect your workforce from over exposure to noise, and helps you ensure your company is complying with The Control of Noise at Work Regulations 2005.
With it’s simple measurement set up and intuitive interface, the SONIK-S makes conducting occupational noise surveys simple and straightforward.
Housed in a modern and attractive body, it has a large colour screen, easy to use interface and is fully compliant with IEC 61672-1:2013 and IEC61252:1993.
Features of the Sonik-S Sound Meter
Hearing Protection using the HML method
User Modes: Noise at Work, Environmental or All
Save results to internal flash memory
Download data to a PC via a USB connection
Noise Analysis Software included with the meter
Small and light weight, fits into small shirt or jacket pocket and also supplied with a strong pocket clip
Measure from 25dB up to 140dB
Measure Lp, Leq, Lmax, LE, Pa2h, Lep'd, Dose, Dose Per Hour, L10, L90, L(user)
Measures parameters simultaneously including LAeq, LCeq and PeakC
Under range and Overload indicators
User selectable Exchange rate
Threshold and Criterion level
A, C or Z frequency weighting selection
A, C or Z Peak Measurements
''Slow, ''Fast'' and ''Impulse'' time weighting selection
Lockable Key pad through options
Technical Specification
|
Instrument Standards: IEC 61672-1: 2002 Class 1 Group X |
Languages: English UK, English US, Chinese, French, German, Italian, Portuguese Brazilian, Russian, Spanish, Dutch, Greek |
|
| Level ranges: | ||
| Range Name | Linear Range | Peak Range |
| Low | 25 – 100 dB | 40 – 103 dB |
| Medium | 45 – 120 dB | 60 – 123 dB |
| High | 65 – 140 dB | 80 – 143 dB |
|
Frequency Range 1 Hz - 20 kHz (electrical characteristics) Class 1: 10 Hz - 20 kHz (including microphone) |
Microphone: Class 1: ½” Pre-Polarized - Free Field (IEC) Pressure (ANSI) Sensititvity (25mV/Pa) |
|
| Measurement Channels: Two |
Microphone Preamplifier: Low Noise, Removable Preamplifier |
|
|
Parameters: SONIK-S: Lp, Leq, Lmax, Lpeak, Exposure Pa2h, Lep'd, %Dose, %Dose Per Hour, Points, Points Per Hour, Under Range, Overload |
Noise Floor (Typical): ‘A’ Weighting < 16.0dB ’C’ Weighting < 17.2dB ‘Z’ Weighting < 18.9dB |
|
| Linear Operating range: 75 dB | Display: 2.4” Full Colour TFT 240x320 pixels | |
|
Frequency Weighting: ‘A’, ‘C’ and ‘Z’ Combinations of ‘A’, ‘A’&’C’ simultaneous or ‘A’&’Z’ simultaneous available for Lp, Leq and Lmax |
Batteries: 4 x AA (1. 5V) - Typically 20 hours continuous use (screen settings dependent) | |
| Time Weighting: ‘Slow’, ’Fast’ and ‘Impulse’ |
External Power:Micro USB type B, 0.5A Connections: Micro USB type B |
|
| Exchange rate: 3dB, 4dB or 5dB |
Environmental: Temperature Operating Range: -10 to + 50ºC Humidity: Up to 90% RH Non-Condensing |
|
| Criterion Level: 75dB, 80dB, 85dB or 90dB |
Case: High Impact ABS plastic with membrane keypad |
|
| Threshold Level: -5dB, -10dB or OFF |
Size and Weight Dimensions: Including Pre-Amplifier: 260mm (H) x 67mm (W) x 26mm (D) Excluding Pre-Amplifier: 184mm (H) x 67mm (W) x 26mm (D) |
|
| Memory: 4MB – Up to 4000 Data Intervals Maximum in one or multiple recordings |
Weight: 207g (Without Batteries |
|
BR 23241 
US 11830 
VN 9556 
CN 2955 
TR 2294 
AR 1926 
AU 1772 
CA 1714 
