● The assistant pressure device nearby the entrance to prevent the PCB from slipping
● Spray nozzle driving by stepping motor is to make sure the coating uniformly
● Module design of spray fluxer system and the design of nozzle always be perpendicular to rail,which can make sure the flux penetrates PCB easily
● Forced air cooling system to attain the cold-down slope as per lead-free required
● Conveyor angle is adjustable by manual
● Standard with hot air heating for preheating zones
● Module design suitable for SMT & THT component soldering
● Exhaust adopt centrifugal fan with double filters to avoid any flux drop to PCB
● The level of flux container is controlled by non-contact sensors to ensure nocorrosion and longer life
● Flux spray nozzle with self-cleaning system
● Standard with air knives to prevent flux expand to preheat zone
● Wave height control adopted with inverter, it can be set individually
● 1/4HP high power mechanical pump to meet the wave as high as 15mm
● Light & Sound alarm, emergency stop and over-load protection
| MODEL | ATS-350 | |
| Dimension(L*W*H) mm | 4401×1582×1735mm | |
| Weight | About 1800KG | |
| Power Supply | 3P5W AC 380V 50/60Hz Option:3P5W AC 220V 50/60Hz | |
| Operating power | ≤9KW | |
| Preheating temperature rise time | ≤18min | |
| Preheat temperature | Room Temperature～230℃ | |
| Width range of PCB | 50-350mm | |
| PCB board component height | Top 120mm,Bottom 25mm | |
| PCB Converyor Direction | L→R Option:R→L | |
| PCB inlet transport height | 750±20mm(Entrance) | |
| Transmission Speed | 500~1800mm/min | |
| Device Layout | ||
| Preheat zones number | 3 Zones Option: Top Preheating（MAX 3PCS） | |
| Preheat mode | Hot Air Preheating | Infrared Preheating |
| Preheating temperature control mode | PID+SSR | |
| Control mode | PC＋PLC | |
| Tin furnace capacity | Lead-free：About 480KG | |
| Working mode of tin furnace | Mechanical Pump | |
| Furnace liner material | Castiron + Enamel Option: All Titanium | |
| Cooling mode | Forced Air Cooling | |
| The above contents are subject to change without further notice! | ||
