ESG-1640ASDII 众程科技全自动数值式平面磨床

SPECIFICATIONS

1A: Longitudinal hydraulic
2A: Longitudinal hydraulic and crossfeed motorized
3A: Longitudinal hydraulic, crossfeed motorized and rapid up/down motorized
ASD: Fully automatic in 3 axis (X,Y,Z) with stepping motor for downfeed, and AC motor for rapid up/down
 

Control Panel

Vertical feed powered by double motors high efficiency AC motor for rapid up/down. Stepping motor for micro downfeed positioning and slow up/down. Quick digit output feedback by encoder. Display for position of Y axis to show the present position of spindle. The digit display is for setting start point, rough grinding volume, start point for finish grinding (finish grinding volume), downfeed volume for finish grinding, target point, rise up point, intermittent spark-out, and spark-out. Cross transverse travel powered by DC servo motor. Available for stefeed and continuous infeed grinding. The speed for dressing wheel is adjustable on the panel.

Item
Table size - 406 x 1020 mm
Max.Grinding length - 1020 mm
Max.Grinding width - 410 mm
Standard magnetic chuck size - 400 x 1000 mm
Max. Distance from spindle center to table - 630mm (OPT. 720mm)
Spindle speed - 60hz 1750rpm / 50hz 1450rpm
Spindle power - 5.0hp (OPT. 7.5p, 10hp)
Hydraulic motor power - 3hp x 6p
Crossfeed motor power - 80w x 6p
Elevating motor power - 1/4w x 6p
Rated power approx.
- 8.5 hp (spindle motor: 5hp)
-11 hp (spindle motor: 7.5hp)
-13.5 hp (spindle motor: 10hp)
Weight - 4000 kg
Floor space - 4020 x 2200 x 2050 mm
Packing dimension - 3250 x 2290 x 2220 mm

Longitudinal Movement of Table
X axis travel hydraulic - 1060 mm
X axis travel manual - 1000 mm
Worktable variable travel - 60hz 5-25m/min / 50hz 5-20 m/min

Cross Transverse Travel
Z axis auto transverse increment - 1-25 mm
Z axis auto. constant speed feed - 20-320 mm/min
Z axis auto travel - 430 mm
Z axis manual travel - 460 mm
Handwheel graduation - 0.02 mm
Handwheel revolution - 5 mm

Wheelhead Vertical Feed
Automatic infeed - 0.001-0.05 mm
Step feed (jog) - 0.001 mm
Rapid travel - 150 mm/min
Slow travel - 6 mm/min
Handwheel graduation - 0.005 mm
Handwheel revolution - 1 mm

Grinding Wheel
Diameter - 355 mm
Width - 50 mm
Bore - 127 mm

GENERAL FEATURES：
1.Column
•Enlarged,honeycomb-ribbed column especially suitable for heavy duty grinding.

2.Construction
•Construction of table,saddle and base is casted with high grade iron,strongly ribbed.

3.Spindle
•Enlarged spindle set is supported by four preloaded precision angular contact ball bearings for heavy duty.

4.Slideways
•Vertical,cross (double vess) and longitudinal (one vee & one flat) slideways are coated with Turcite-B,provides stable movement and durable accuracy.

5.Automatic continuous lubrication system
•All slideways and screws are fully oiled by automatic continuous lubrication system to eliminate wears on slideways & screws.

6.Cross feed
•Ball screw for cross travel,powered by AC motor.

7.Proximity switch
•Provide built-in-type (hidden) proximity switch,features safe and easy operation.

8.Table speed control
•Presettable hydraulic table speed control allows operator to pre-set speed rate,enable to get same speed rate when engaging hydraulic table every time.