RANKCONN - Packaging Air Leak Tester
Brand: Rankconn Instruments
Model: ALT-010
Introduction:
ALT-A010 Leak tester is a kind of tester that use compression air to produce negative pressure by vacuum device to test the seal capability and processing technique of soft plastic packaging material. It has advantages of easy operation, novel design, convenient to observe test result, especially to detect some tiny pole leak.
Application:
It is applicable in testing the seal of soft packaging in food and pharmaceutical industry, etc. It can test the seal capability of soft packaging accurately, which provides scientific date for relative technical requirement. It also can test the specimen which has done drop and compression test.
Work principle:
Through vacuumizing the vacuum chamber to let the sample dipped in the water and it will cause an inside and outside pressure difference. By observe the air leak or water permeate case to judge the seal capability of the sample.
Air pressure difference between the inside and outside of the sample —- air expand — air leak— air new balance— air rate rise in the inside of the sample— air expand rate rise— sample receives bigger pressure— air leak stronger.
Remark: the parameter’s set is according to the products’ inside air rate, for example, the high air rate of the sample, the high inside air expand rate, so the vacuum pressure should be set lower.
Standard
GB/T 15171、ASTM D3078 -1994, GB/T27728
Specification:
| Vacuum degree | : 0～-90 kPa |
| Accuracy | : +/- 1% |
| Internal chamber size |
: Ф270mm×210mm(H) (Standard) : Ф360mm×585mm(H) (Optional) : Ф460mm×330mm(H) (Optional) |
| Compression air pressure range require | : 0.5 ~ 0.7 mPa |
| Power | : AC220V 50Hz |
US 959 
MY 581 
CN 238 
AP 212 
AU 77 
KR 74 
CA 59 
GB 54 
