Equipment Usage:

• JG-20K Electronic Universal Testing Machine is driven by a servo motor, which drives the moving beam up and down through a driving mechanism to realize the test loading process.
• This machine is mainly used for testing and analyzing the mechanical properties of wires and non-metallic materials such as tension, compression and bending.
• The test parameters such as tensile strength, maximum strength and tensile elastic modulus can be obtained automatically, and the test and data can be provided according to GB, ISO, DIN, ASTM, JIS and other international standards, and the constant pressure test can be done.

Curve Category:

• Load VS Displacement Load VS Time Displacement VS Time Stress VS. Strain Load VS Two extension, can be tested and provide data in accordance with GB, ISO, DIN, ASTM, JIS and other international standards.​

Load - Time

Load - Displacement

Load - Extension

Extension - Time

Displacement - Time

Stress VS Strain

 

​Features:

• High rigidity, high precision, high transmission efficiency Panasonic servo motor and driver.
• Planetary deceleration system drives the ball screw to realize the test loading process.
• Advanced DSP+MCU all-digital closed-loop control system for controlling and measurement.
• Easy-to-use software, multiple curve type and dynamic curve display.
• Data acquisition frequency up to 1000Hz (need to be customized).
• High speed data processing system.
• Data can be reanalyzed through the graphical processing module to realize the second edit.
• Excel report can be exported, or printed out directly.

​Conform To The Standards:

• Applicable ASTM, DIN, ISO, JIS, BS and other international standards;
• GB/T2611 and GB/T 16491 for manufacturing;
• GB/T12160 and GB/T16825 for examination and acceptance.

Technical Specifications:

Model		JG-20K
Testing Parameters	Capacity	200kN (20Ton)
	Unit (Switchable)	Kg,  lb,  N, kN
	Load Accuracy	≤±0.5%
	Load Resolution	1/500000
	Test force measurement range	0.4%—100%FS
	Deformation measurement range	0.2%-100%FS
	Power control rate adjustment range	0.01-5%FS/S
	Power control rate relative error	within ±1% of setting value
	Deformation rate adjustment range	0.02—5%FS/S
	Deformation controlled rate relative error	within ±1% of setting value
Controlling Parameters	Test speed (Beam moving speed)	0.001—500mm/min
	Constant, constant deformation, constant displacement control	0.5%--100%FS
	Speed Accuracy	≤±0.3%
	Effective width	500mm
	Stroke (exclude the grips)	1000mm
	Stroke Resolution	0.01mm
Others	Power supply	380V ±10%, 2.1KW
	Dimension (W x D x H)	1100 × 580 × 2130mm
	Weight (approx...)	1000kg