- Ultra-Thin Body
- Replaceable Membranes
- 3.5 mm Connector
Details
Built-in Microchip
The built-in microchip stores sensor type, serial number and calibration information including date, time, offset, slope, probe condition and buffers used. This information is automatically retrieved by edge® once the electrode is plugged in. The ability to transfer information allows for hot swapping of probes without having to recalibrate. All DO measurements are performed within the electrode and transferred digitally to the meter. This overcomes any noise issues associated with the traditional high impedance analog measuring system. Electrical noise can be generated from a built in temperature sensor and while working in a humid environment.
Ultra-Thin Body
The ultra-thin, 12mm, design allows for convenient measurement in narrow vessels such as test tubes and wine bottles.
Replaceable Membranes
With screw-on caps, edge® DO PTFE membranes are easy to replace for faster maintenance.
Features at-a-glance:
- Digital Microprocessor
- Ultra-thin design – 12mm body for convenience
- Replaceable membranes – easy screw on for easy maintenance
- Polarographic sensor
- Built-in temperature sensor
- 3.5mm digital plug – easy to plug in, no alignment necessary
Specifications
| Body Material | PEI |
|---|---|
| Type | Polarographic |
| Anode | Ag/AgCl |
| Cathode | Glass encapsulated Platinum |
| Range | 0 to 300% oxygen saturation |
| Body Length / Overall Length | 120mm |
| Recommended Operating Temperature | 0 to 50°C (32 to 122°F) |
| Temperature Sensor | yes |
| Amplifier | no |
| Digital | yes |
| Compatible Meters | edge multiparameter |
| Cable | 1 m (3.3') |
| Connection | 3.5 mm connector |
US 25847 
BR 22115 
GB 16867 
AU 9901 
CA 9396 
IN 5998 
IE 4484 
NZ 3848 
