High temperature chamber furnace with MoSi Heating elements as table top model up to 1800°C

Designed as tabletop models, these compact high-temperature furnaces have a variety of advantages. The first-class workmanship using high-quality materials, combined with ease of operation, make these furnaces all-rounders in research and the laboratory. These high-temperature furnaces are also perfectly suited for the sintering of technical ceramics, such as zirconium oxide dental bridges.

• Tmax 1600 °C, 1750 °C, or 1800 °C
• High-quality molybdenum disilicide heating elements
• Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
• Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
• Compact design with lift door, opening upwards
• Adjustable air inlet
• Exhaust air opening in the roof
• Type B thermocouple
• Defined application within the constraints of the operating instructions
• NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Additional equipment

• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Square saggar for charging of up to three layers
• Protective gas connection to purge with non-flammable protective or reaction gases
• Manual or automatic gas supply system
• Process control and documentation via VCD software package for monitoring, documentation and control

• Model	Tmax °C	Inner dimensions in mm			Volume in l	Outer dimensions in mm			Connected load kW	Electrical connection	Weight in kg	Minutes to Tmax
  		W	D	H		W	D	H
  LHT 02/16	1600	90	150	150	2	470	630	760+260	3.0	single-phase	75	30
  LHT 04/16	1600	150	150	150	4	470	630	760+260	5.2	3-phase	85	25
  LHT 08/16	1600	150	300	150	8	470	810	760+260	8.0	3-phase	100	25
  LHT 01/17 D	1650	110	120	120	1	385	425	525+195	2.2	single-phase	28	10
  LHT 03/17 D	1650	135	155	200	4	470	630	760+260	3.0	single-phase	75	60
  LHT 02/17	1750	90	150	150	2	470	630	760+260	3.0	single-phase	75	60
  LHT 04/17	1750	150	150	150	4	470	630	760+260	5.2	3-phase	85	40
  LHT 08/17	1750	150	300	150	8	470	810	760+260	8.0	3-phase	100	40
  LHT 02/18	1800	90	150	150	2	470	630	760+260	3.6	single-phase	75	75
  LHT 04/18	1800	150	150	150	4	470	630	760+260	5.2	3-phase	85	60
  LHT 08/18	1800	150	300	150	8	470	810	760+260	9.0	3-phase	100	60