TQC Sheen - TESTEX REPLICA TAPE, PRESS O-FILM

Replica tape for measuring blasted surface profiles. By placing the Tqc replica tape on the surface and rubbing over it, the Rt (total roughness) or peak-to-valley height of the profile can be taken and then measured with a film thickness meter.

 

1. TQC Replica tape consists of a layer of compressible foam affixed to an incompressible polyester substrate. 

2.When pressed against a roughened/gritblasted (steel) surface, the foam collapses acquiring an impression of the surface. 

3.Placing the compressed tape between the anvils of the SP1570 micrometric thickness gage, and subtracting the contribution of the incompressible substrate (50 micrometers or 0.002 inches), gives a measure of the surface profile. 

 

One box of Testex contains tape for 50 measurements.

 

 

 

ORDERING INFORMATION

 

Art. No. LD2065

Type Testex-tape Medium, foam layer thickness 0.4 mills/10µm not to be used with a film thickness meter

 

 

Art. No. LD2066

Type: Testex-tape coarse Minus, range 0.5 to 1.0 mils/ 12 to 25 µm

 

 

Art. No. LD2071

Type: Testex-tape COARSE range: 0.8 to 2.5 mils / 20 to 64 µm

 

 

Art. No. LD2070

Type: Testex-tape X-COARSE range:1.5 to 4.5 mils / 38 to 115 µm

 

 

Art. No. LD2067

Type: Testex-tape X-coarse Plus, range 4.6 to 5.0 mils / 116 to 127 µm