雪兰莪,吉隆玻,梳邦再也Obsnap Instruments Sdn Bhd的Paint Strength Testers - Coating / Paint Testing-TQC sheen - Bending / Impact / Cupping Testers

The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in. Each Impact test comes as a complete set (instrument and accessoires) to perform a test according DIN/ISO 6272, ASTM D2794 and ASTM G14

Mandatory test in Qualicoat, QIB and GSB accredited laboratories.

Standards for impact testing
Below mentioned standards are a list of the possible standards. If the required standard is not listed below please contact TQC to check if adoption of this standard is possible*:

	SP1880	SP1890	SP1891	SP1895	SP1896
Type of Impact	Indirect	Direct	Direct	Direct	Direct
ISO 6272-1:2002		•
ISO 6272-2:2002	•
ISO 6272:1993			•
ASTM D 2794:2004	•
ASTM G14-04				•
JIS K 5600-5-3:1989	•	•
EN 12206-1:2004	•		•	•
EN 13523-5:2001	•	•
AAMA 2605-05	•		•
Qualicoat 2006	•		•
Qualisteelcoat 2008	•		•
Canadian Standards Association (CSA)					•

* Conformation to a required standard depends on the impact tester type. The combination of items can change to comply with another standard.

Features:

The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in.

ORDERING INFORMATION

Art. No. SP1880
TQC Impact Test according to ISO 6272-2 and ASTM D2794
Type: Indirect Impact Tester
Content: Base plate assembly, guide tube, release collar, punch Ø12.7 mm , punch Ø15.9 mm, weight 1 kg, die Ø16.3 mm. Max test panel thickness: 4,5 mm

Art. No. SP1890
TQC Impact Test according to ISO 6272-1
Type: Direct Impact Tester
Content: Base plate assembly, guide tube, release collar, clamp device, ball Ø20 mm, die 27mm, weight 1 kg. Max. test panel thickness: 1,25mm

Art. No. SP1891
TQC Impact Test according to ISO 6272-1 and ASTM D2794 (before 1993)
Type: Direct Impact Tester
Content: Base plate assembly, guide tube, release collar, clamp device, ball Ø20 mm, die 27mm, weight 1 kg, ball Ø15.9 mm, die 16.3mm, weight 0.9 kg

Art. No. SP1895
TQC Impact Test according to ASTM G14
Type: Direct Impact Tester
Content: Base plate assembly, guide tube, release collar, punch Ø15.9 mm, weight 1.361 kg and a V-notch vise with spring clamp to hold the pipe

Art. No. SP1896
TQC Impact Test according to CSA

您的名字 *
您的公司名字
您的邮件 *
您的联络号码 *
标题 *
信息 *
验证码 *

全名 *
邮件 *
联络电话 *
公司名字
公司地址
标题 *
我们如何可以帮助您？ *

雪兰莪,吉隆玻,梳邦再也 - 零售商 TQC sheen - Bending / Impact / Cupping Testers - Impact Test

TQC sheen - Bending / Impact / Cupping Testers - Impact Test