Conveyor belt transfer station
Level measurement and point level detection at the belt transfer point
 |
|
Process data
Measuring task
Level measurement and point level detection
Measuring point
Silo
Measuring range up to
5 m
Medium
Stones, gravel and sand
Process temperature
-40 … +50 °C
Process pressure
0 … 0 bar
Special challenges
Extremely noisy and dusty environment, abrasion
Application
The transport of coarse and fine bulk solids within a stone processing facility takes place in most cases via conveyor belts. To achieve an even throughput and compensate for volume fluctuations during transport, belt transfer points are integrated in the conveyor line. The incoming bulk material is briefly stored in a buffer silo to prevent belt overfilling. This is the point where the level and the point level must be monitored.
Your benefit
Reliable
Reliable monitoring of silo filling
Cost effective
Optimal utilization of conveyor belt capacity
User friendly
Maintenance-free operation
Recommended products
VEGAPULS 69
Non-contact level measurement with radar at the belt transfer station
- Highly reliable even in dusty environments
- Maintenance-free non-contact measurement
- Maximum operational reliability due to noise insensitivity
Measuring range - Distance
120 m
Process temperature
-40 ... 200 °C
Process pressure
-1 ... 20 bar
VEGAMIP 61
Microwave barrier for level detection at the belt transfer point
- High measurement certainty even with soiling and deposits
- Long service life ensured by robust sensor
- Maintenance-free operation with non-contact measuring principle
Measuring range - Distance
100 m
Process temperature
-40 ... 80 °C
Process pressure
-1 ... 4 bar
US 24905 
BR 23546 
GB 13004 
AU 9599 
CA 9599 
IN 7130 
IE 5466 
VN 5448 
