Virex®II 256 One-Step Disinfectant Cleaner and Deodorant Description A one-step, quaternary disinfectant cleaner and deodorant to clean and disinfect hard surfaces. Broad Spectrum Activity • Kills microorganisms including HIV-1, VRE, MRSA, GRSA, MRSE, VISA, PRSP, Herpes Simplex Types 1&2, Influenza Type A2, Adenovirus Type 2, Rotavirus and many more • Meets OSHA bloodborne pathogen standards Cost-Eective • Highly concentrated quaternary formula provides excellent one-step, cost-eective cleaning and disinfection No Rinse Formula • Use solution is neutral to floor finish so it will not dull, pit or soften floor finishes Odor Control • Kills the organisms that cause odors and works as an odor counteractant to further eliminate odors not associated with bacteria Use Directions • Add the product at ½ oz. per gallon of water (1:256). • Pre-clean heavily soiled areas. For Use as a One-Step Cleaner/Disinfectant: • Apply use solution to hard, non-porous environmental surfaces. To disinfect, all surfaces must remain wet for 10 minutes. Note: Rinsing is not necessary unless floors are to be coated with finish or restorer. All food contact surfaces such as appliances and kitchen countertops must be rinsed with potable water. Do not use on glassware, utensils or dishes. For Use as a Cleaner and Deodorizer: • Apply use solution to surfaces. Wipe surfaces and let air dry. For Use as a Non-Acid Bowl Cleaner/Disinfectant in Toilet Bowls and Urinals from Use-Dilution: • Empty toilet bowls by forcing water through the trap. Apply use solution to exposed surfaces in toilet bowls and urinals. Swab entire surface area especially under rim. Allow entire surface to remain wet for 10 minutes. Flush toilet or urinal and rinse swab applicator thoroughly. For Use to Clean and Disinfect Shower Rooms, Locker Rooms and Other Large, Open Areas with Floor Drains: • Apply use solution to floors, walls and ceilings. All surfaces must remain wet for 10 minutes. Scrub and rinse surfaces thoroughly and let air dry. To Kill Mold, Mildew and Fungi (in 5% soil load): • Apply use solution and allow surfaces to remain wet for 10 minutes. Wipe and let air dry. To Control Mold and Mildew: • Apply use solution to pre-cleaned surfaces and allow to air dry. Repeat weekly or when growth reappears. Delivery area Johor Pasir Gudang , Nusa Jaya , Senai , Tanjung Langsat , Gelang Patah , Johor , Melaka , Negeri Sembilan , Selangor , Pahang , Perak , Pulau Pinang , Kedah Pulau Pinang / Penang / Kedah Butterworth , Bayan Lepas , Pulau Pinang , Bukit Mertajam , Simpang Ampat , Parit Buntar , Batu Kawan , Juru, Bukit Minyak , Sungai Petani , Kulim , Kuala Ketil , Padang Serai , Yan , Bedong , Gurun , Alor Setar , Kepala Batas , Pengkalan Hulu , Jeniang , Pendang , Pokok Sena , Jitra , Bukit Kayu Hitam , Changlun , Kuala Kedah