Supply voltage
Load voltage L+
● Rated value (DC)		24 V
● permissible range, lower limit (DC)		20.4 V
● permissible range, upper limit (DC)		28.8 V
Input current
from load voltage L+ (without load), max.		60 mA
from backplane bus 5 V DC, max.		40 mA
Power loss
Power loss, typ.		6.8 W
Digital outputs
Number of digital outputs		8
Short-circuit protection		Yes; Electronic
● Response threshold, typ.		3 A
Limitation of inductive shutdown voltage to		L+ (-48 V)
Controlling a digital input		Yes
Switching capacity of the outputs
● on lamp load, max.		10 W
Load resistance range
● lower limit		12 !&
● upper limit		4 k!&
Output voltage
● for signal "1", min.		L+ (-0.8 V)
Output current
● for signal "1" rated value		2 A
● for signal "1" permissible range for 0 to 40 °C, min.		5 mA
● for signal "1" permissible range for 0 to 40 °C, max.		2.4 A
● for signal "1" permissible range for 40 to 60 °C, min.		5 mA
● for signal "1" permissible range for 40 to 60 °C, max.		2.4 A
● for signal "1" minimum load current		5 mA
● for signal "0" residual current, max.		0.5 mA
Output delay with resistive load
● "0" to "1", max.		100 µs
● "1" to "0", max.		500 µs
Parallel switching of two outputs
● for uprating		No
● for redundant control of a load		Yes
Switching frequency
● with resistive load, max.		100 Hz
● with inductive load, max.		0.5 Hz
● with inductive load (acc. to IEC 60947-5-1, DC13), max.		0.5 Hz
● on lamp load, max.		10 Hz
Total current of the outputs (per group)
horizontal installation
— up to 40 °C, max.		4 A
— up to 60 °C, max.		4 A
vertical installation
— up to 40 °C, max.		4 A
Cable length
● shielded, max.		1 000 m
● unshielded, max.		600 m
Interrupts/diagnostics/status information
Alarms		No
Diagnostics function		No
Alarms
● Diagnostic alarm		No
Diagnoses
● Wire-break		No
● Short-circuit		No
● Fuse blown		No
● missing load voltage		No
Diagnostics indication LED
● Rated load voltage PWR (green)		No
● Fuse OK FSG (green)		No
● Status indicator digital output (green)		Yes; per channel
Potential separation
Potential separation digital outputs
● between the channels		Yes
● between the channels, in groups of		4
● between the channels and backplane bus		Yes; Optocoupler
Isolation
Isolation tested with		500 V DC
connection method
required front connector		20-pin
Dimensions
Width		40 mm
Height		125 mm
Depth		120 mm
Weights
Weight, approx.		190 g