Supply voltage
Reverse voltage protection		Yes
Load voltage L+
● Rated value (DC)		24 V
● Reverse polarity protection		Yes
Input current
from load voltage L+ (without load), max.		5 mA; Per channel
from backplane bus 3.3 V DC, max.		10 mA
Power loss
Power loss, typ.		1.5 W
Address area
Address space per module
● Address space per module, max.		1 byte
Digital outputs
Type of digital output		Source output (PNP, current-sourcing)
Number of digital outputs		8
Short-circuit protection		Yes
● Response threshold, typ.		1.5 A
Limitation of inductive shutdown voltage to		Typ. L+ (-55 to -60 V)
Controlling a digital input		Yes
Switching capacity of the outputs
● on lamp load, max.		5 W
Load resistance range
● lower limit		48 !&
● upper limit		3 400 !&
Output voltage
● for signal "1", min.		L+ (-1.0 V)
Output current
● for signal "1" rated value		0.5 A
● for signal "1" permissible range, min.		7 mA
● for signal "1" permissible range, max.		600 mA
● for signal "0" residual current, max.		0.3 mA
Output delay with resistive load
● "0" to "1", max.		300 µs
● "1" to "0", max.		600 µs
Parallel switching of two outputs
● for uprating		No
● for redundant control of a load		Yes
Switching frequency
● with resistive load, max.		100 Hz
● with inductive load, max.		2 Hz
● on lamp load, max.		10 Hz
Total current of the outputs
● Current per module, max.		4 A
Cable length
● shielded, max.		1 000 m
● unshielded, max.		600 m
Interrupts/diagnostics/status information
Diagnostics function		No
Diagnostics indication LED
● Status indicator digital output (green)		Yes
Parameter
Remark		3-byte parameter (not accessible for the user)
Potential separation
Potential separation digital outputs
● between the channels		No
● between the channels and backplane bus		Yes
Isolation
Isolation tested with		500 V DC
Dimensions
Width		15 mm
Height		81 mm
Depth		52 mm
Weights
Weight, approx.		40 g