Technical Data
| Hardware | |
|---|---|
| CPU | 16-bit microcontroller |
| CAN | 1× CAN interface acc. to ISO 11898, galv. isolated Connection with D-Sub9 Plug and socket (bridged); Assignment acc. to DIN 41652 |
| CAN protocol | DS 301 and 401 |
| Number of modules/bus | 127 |
| Setting | of module address via 2 HEX switches of baud rate via HEX switch |
| Connection system | Spring connection, clamping range 0.25 – 1.5 mm², solid wire “e” fine wire “f” 0.25 – 1.5 mm², “f” with wire end ferrule without plastic collar 0.25 – 1.5 mm² |
| Connection technology | Two-wire and three-wire connection, stripping length 10 mm |
| Operating status display | 1× LED green for power supply (5 V) 1× LED green for operating mode (Run) 1× LED red for error status (Err) 32× LED green for set inputs |
| Dimensions (l×w×h) | 121 mm × 120 mm × 48 mm |
| Weight | 600 g |
| Protection class | IP20, EMC requirements acc. to CE |
| Storage temperature | –30°C up to +70°C |
| Operating temperature | 0°C up to +60°C |
| Humidity | 90 % non-condensing |
| Power supply | 24 V DC ±20 % |
| All in- and outputs active, including LEDs | 540 mA |
| Digital inputs | |
|---|---|
| Number of inputs | 32 |
| Switching level “1” | +15.0 V up to +28.8 V |
| Switching level “0” | 0.0 V up to +8.0 V |
| Potential isolation | Optocoupler |
| Input current/input | 11 mA |
| Sampling frequency (Fg) | 2.5 kHz |
| Signal delay | < 400 μs |
