| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | Vcc | 2.0 | - | 6.0 | V |
| Quiescent Current | Iq | - | 1.8 | - | mA |
| Output Short-Circuit | - | - | - | ||
| Output Current (Max) | Iomax | - | - | 30 | mA |
| Input Voltage Range | Vcm | 0 | - | Vcc-1.5 | V |
| Differential Input Voltage | Vid | ±0.6 | - | - | V |
| Output Voltage Swing | Vo | 0.2 | - | Vcc-0.2 | V |
| Slew Rate | SR | - | 1.0 | - | V/μs |
| Gain Bandwidth Product | GBP | - | 1.0 | - | MHz |
| Common Mode Rejection Ratio | CMRR | - | 70 | - | dB |
| Power Supply Rejection Ratio | PSRR | - | 80 | - | dB |
| Operating Temperature | Topr | -40 | - | 85 | °C |
| Storage Temperature | Tstg | -65 | - | 150 | °C |
Instructions for Use:
Supply Voltage:
- Ensure the supply voltage (Vcc) is within the range of 2.0V to 6.0V.
- Connect the positive supply to Vcc and the negative supply to GND.
Quiescent Current:
- The typical quiescent current is 1.8mA. This value should be considered in power budget calculations.
Output Short-Circuit:
- The output can handle short circuits, but it is recommended to avoid prolonged short-circuit conditions to prevent damage.
Output Current:
- The maximum output current (Iomax) is 30mA. Do not exceed this limit to avoid overheating or damage.
Input Voltage Range:
- The input voltage range (Vcm) should be between 0V and Vcc - 1.5V. Inputs outside this range can cause improper operation or damage.
Differential Input Voltage:
- The differential input voltage (Vid) should not exceed ±0.6V to prevent damage to the input stage.
Output Voltage Swing:
- The output voltage swing (Vo) is from 0.2V above ground to 0.2V below Vcc. Ensure that the load does not require voltages outside this range.
Slew Rate:
- The typical slew rate (SR) is 1.0V/μs. This limits the rate at which the output can change and should be considered for high-frequency applications.
Gain Bandwidth Product:
- The gain bandwidth product (GBP) is 1.0MHz. This is the product of the open-loop gain and the frequency at which it is measured.
Common Mode Rejection Ratio:
- The typical common mode rejection ratio (CMRR) is 70dB. This indicates the ability to reject common-mode signals.
Power Supply Rejection Ratio:
- The typical power supply rejection ratio (PSRR) is 80dB. This indicates the ability to reject variations in the power supply.
Operating Temperature:
- The operating temperature range (Topr) is from -40°C to 85°C. Ensure the device operates within this range to maintain performance and reliability.
Storage Temperature:
- The storage temperature range (Tstg) is from -65°C to 150°C. Store the device within this range to prevent damage.
Handling Precautions:
- Handle the device with care to avoid static discharge and physical damage.
- Follow proper soldering techniques and use appropriate tools to ensure reliable connections.
