Please login to use this feature. You can use this feature to add the product to your favourite list.
Close
You have added this product to your favorite list. Check My Favourite
Close
You have removed this product from your favourite list.
Close
Please login to use this feature. You can use this feature to add the company to your favourites list.
Close
This company has been added successfully. Check My Favourite
Close
This company has been removed from your favourite list.
Close
Please login to use this feature. You can use this feature to add the company to your inquiry cart.
Close
This company has been added to your inquiry cart.
Close
This company has been removed from your inquiry cart.
Close
This product has been added to your inquiry cart.
Close
This product has been removed from your inquiry cart.
Close
Maximum number of Product/Company has been reached in inquiry cart.
Close
LITAT SILKSCREENING
LITAT SILKSCREENING 199303009951 (JM0199474-H)
Waktu
Pejabat
Isnin - Jumaat 9:00 AM - 6:00 PM
Sabtu 9:00 AM - 1:00 PM
Ahad Closed
We′re closed on Public Holiday
Open Closed
SSM

Step-by-Step Guide to Silkscreen Printing

20-Mar-2024

Silkscreen printing, also known as screen printing, is a versatile printing method that involves transferring ink through a stencil or screen onto a substrate. Here's a comprehensive guide to the silkscreen printing process:

1. Design Preparation:

  • Begin by creating or obtaining the design you wish to print. This design can be created digitally using graphic design software or hand-drawn on paper. Ensure that the design is in the appropriate format and size for printing.

2. Screen Preparation:

  • Choose a screen made of a fine mesh material such as polyester or nylon. The mesh count determines the level of detail in the print, with higher mesh counts allowing for finer details.
  • Coat the screen with a light-sensitive emulsion, following the manufacturer's instructions. This emulsion will harden when exposed to light, creating a stencil on the screen.
  • Once the emulsion has dried, place the design onto the screen and expose it to UV light using a light table or exposure unit. The areas of the emulsion covered by the design will remain soft, while the exposed areas will harden.
  • Rinse the screen with water to wash away the unexposed emulsion, revealing the stencil.

3. Setup:

  • Place the prepared screen onto the printing press, securing it tightly in place.
  • Position the substrate (such as paper, fabric, or another material) onto the printing surface below the screen.

4. Ink Preparation:

  • Choose the appropriate ink for your design and substrate. Silkscreen printing inks come in various types, including water-based, plastisol, and solvent-based inks.
  • Mix the ink to achieve the desired color and consistency, following the manufacturer's instructions.

5. Printing:

  • Load the ink onto one end of the screen, above the design area.
  • Using a squeegee, pull the ink evenly across the screen, applying pressure to push the ink through the open areas of the stencil and onto the substrate below.
  • Lift the screen carefully to reveal the printed design on the substrate. Repeat the process for each print, reloading the screen with ink as needed.

6. Curing:

  • Depending on the type of ink used, the printed substrate may need to be cured to set the ink and ensure durability.
  • Cure the prints using a heat source such as a conveyor dryer, flash dryer, or heat press, following the ink manufacturer's recommended curing temperature and time.

7. Finishing:

  • Once cured, inspect the prints for quality and consistency.
  • Allow the prints to cool before handling or further processing.
  • If desired, trim or finish the printed substrates according to your project requirements.

8. Cleanup:

  • Clean the screen and printing equipment thoroughly using appropriate solvents or cleaners to remove any ink residue and emulsion buildup.
  • Store the screen and equipment properly to prevent damage and ensure longevity.
Pejabat Utama

LITAT SILKSCREENING 199303009951 (JM0199474-H)
20, Jalan Selatan 6/5, Taman Perusahaan Ringan Pulai, 81300 Johor Bahru, Johor, Malaysia.

Tel:

Emel:
Laman Web: https://www.litatsilkscreen.com
Laman Web: https://litatsilkscreen.newpages.com.my/
Laman Web: https://litatsilkscreen.onesync.my/

Melayari Melalui : Laman Utama - Klasifikasi - Syarikat - Tempat - Tag - Produk - Berita Baru dan Promosi - Jawatan Kosong - Laman Web Mudah Alih - Google - Keputusan SEO

NEWPAGES

  • US 14215
  • GB 11453
  • CA 9418
  • AU 9365
  • IE 3995
  • NZ 2867
  • BR 2042
  • CN 1405
Orang dalam talian
Seni Jaya Logo
Brochure
Download
Our PackageContact Us