Technical Data
| Type | CS-801 |
| Geometry |
d/8(Diffused lighting, 8 degrees observe angle)(conform to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7, JIS Z8722 Condition c standards) |
| Size of integrating sphere | Φ40mm |
| Illumination Light source | CLEDs(entire wavelength balanced LED light source) |
| Sensor | dual light path sensor array |
| Wavelength range | 400-700nm |
| Wavelength interval | 10nm |
| Half spectral width | 5nm |
| Reflectivity range | 0-200% |
| Reflectivity resolution | 0.01% |
| Observation angle | 2°/10° |
| Measurement light source |
A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,DLF,TL83,TL84, NBF,U30,CWF |
| Data being displayed | sample's color values, reflectance, color difference values/graph, pass/fail results, color error tendency, color simulation, display measurement area, bhistory data color simulation, manual input standard sample, generate measurement report |
| Measurement time | About 1 second |
| Measurement time interval | 0.5 second |
| Measuring caliber | Φ11mm |
| Color space | CIE-L*a*b,L*C*h,L*u*v, XYZ, Yxy, reflectance, Hunterlab, Munsell MI, CMYK,RGB,HSB |
| Color difference formulas | ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00,ΔEab(Hunter),555color classification |
| Other colorimetric indices |
WI(ASTM E313-00,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube Berger Stensby), YI(ASTM D1925,ASTM E313-00,ASTM E313-73), Tint(ASTM E313,CIE,Ganz),metamerism index Milm, adhesive/changing color fastness, ISO luminance,8 gloss, A density, T density, E density, M density |
| Repeatability | light splitting reflectivity: standard deviation within 0.08% |
| Chromaticity values: ΔE*ab<=0.015（After calibration, standard deviation of 30 measurements on test white board, 5 second intervals），Maximum:0.03 | |
| Battery capacity | rechargeable, 20000 continuous tests, 7.4V/6000mAh |
| Interface | USB |
| Data storage | 40000 test results |
| Light source longevity | 5 years, 1.5 million tests |
| Inter-instrument agreement | ΔE*ab within 0.2(BCRA color charts II, average of the 12 charts) |
| Size | 350*300*200mm(L*W*H) |
| Weight | 4.5kg |
| Display | 5 inches True color screen |
| Work temperature range | 0~45℃, relative humidity 80% or below（at 35°C）， no condensation |
| Storage temperature range | -25℃ to 55℃， relative humidity 80% or below（ at 35°C）， no condensation |
| Standard accessories | AC power line, operating manual, color management software, drive software, electronic operating manual, color management guide, USB cable, black/white calibration tube, measurement and test report |
| Optional accessories | powder molding device,40*10 cuvette |
| Color matching system | Matches |
| UV light source | without |
