Comes with the solutions, by installing the MS1900 Industrial Effluent and Process Water Analyzer at the outflow of the plant, the customer is provided data as soon as the contamination starts to increase and is able to take appropriate action, avoiding all the problems associated with an unexpected pollution event.
THE MEASUREMENT PROCESS
- Water flow continuosly through the sample tank
 - Dynamic equilibiriu is formed in the sample tank
 - Gas concentration in headspace is proportional to concentration in the water
 - Gas in the headspace is sampled continuously at intervals by our sensor
 - Values are calculated and are transmitted on the 4-20 mA output
 
BTEX, Benzene, Chlorobenzene, 1,2-Dichlorobenzene, 1,3-Dichlorobenzene, 1,4-Dichlorobenzene, Ethyl Benzene, Isopropanol, Isopropylbenzene, Naphthalene, Stryrene, Toluene, 1,2,4-Trimethylbenze, 1,3,5-Trimethylbenze, 1,2,4-Trichlorobenzene, m-Xylene, 0-Xylene, p-Xylene, Chloroform, Methanol.
CLICK HERE for more information on our MULTISENSOR.


            
            
            
		
                 







BR                                9044                            
VN                                6546                            
US                                2972                            
CN                                1528                            
AR                                1500                            
MY                                1201                            
SG                                653                            
IN                                598                            
        
        