Specifications

• Base material: Stainless steeel SUS303
• Weight: 2.9kg
• Sensitivity
  Ⅰ： 1Division ＝ 0.01mm/m
  Ⅱ： 1Division ＝ 0.05mm/m
  Ⅲ： 1Division ＝ 0.1mm/m
• Measuring Range (3 Range)
  ± 0.2mm/m（1Division 0.01mm/m）
  ± 1mm/m（1Division 0.05mm/m）
  ± 2mm/m（1Division 0.1mm/m）
• Operating Temperature 0 40℃
• Pointing Error Within ± 0.5 Division
• Repeatability Accuracy Within ± 0.005mm/m
• Output SIgnal
  Analog output
  ± 200mV F.S. （for all range）
  Connectible load resistance： No less than 100 Ω
• Power Source
  9V dry cell 1 pc
  AC adapter （DC9V output ·AC100V ～ 240V） included
• Run time (continuous use)
  Zinc-carbon cell： Approx. 25 hrs.
  Alkaline cell： Approx. 50 hrs.
  ※ May vary depending upon measurement condition
• Base Dimension L150 × W85 × H195mm　※ Excluding Handle (dimension: L150 × W55mm)

Accessories

• Shock resistant aluminum case
• Warranty·Instruction manual·Inspection report
• AC adapter (DC9V output·AC100V ～ 240V)
• 9V dry cell

Use

• Leveling of machine tools and surface plates.
• Straightness and flatness measurements.

Material

• Body: Aluminum

Features

• Quicker response than bubble level
• Sensitivity is switchable in three steps
• Connectible directly to commonly-available analog recorder through analog output
• Custom-made base can be attached to the threaded screw holes (M5 × P0.8) at the bottom base
• Pendulum system prevents any hysteresis errors and is not influenced by temperature change