Capacitance	Yes
RPM	Yes
Low Pass Filter (LPF)	Yes
Replacement Fuses	EEDMFUSE-7 and EEDMFUSE-8
Adjustable Trigger Level	Yes
AC Volts	750
Basic DC Accuracy, %	0.1
Battery Type	9 Volt Lithium Metal (Not sold through Snap-on, purchase locally)
Micro Amps	Yes
Country Of Origin	KOR
Dimensions, inches	4.7 x 7.7 x 1.6
Noise Reduction Circuit	Yes
Case or Zipper Pouch (Included)	EEDM5F-CC
Temperature, (Included)	EEDMTEMP-1
mS Pulse Width	Yes
CAT Rating	CATIII 750 V AC, CATIII 1,000 V DC, CATIV 600 V AC/DC
Backlight	Always On
Auto Shut-off	Yes
Test Leads	EEDMLEADSET
Certificate of Calibration Model	EEDM596FKCRTâ€
DC Amps	10
Peak Hold	1 mS
UL® Listed	cULus 61010-1
Insulation Test	No
Analog Bar Graph	Yes
Resistance, ohms	40M
Data Hold	Yes
Auto Range	Yes
Duty/Dwell	Yes
True RMS (Root Mean Square)	Yes
AC Amps	10
Display Count	40,000
Fuses	EEDMFUSE-7, EEDMFUSE-8
Blown Fuse Identifier	Yes
Comp. Output (Bluetooth)	Yes
Display Type	Color Screen
Min/Max	Yes
DC Volts	1,000
Easy Open Battery and Fuse Door	EEDM5F-DOOR
Color Screen	Yes
Frequency	Yes

Features

• Use in the following six quick steps: get the app, select unit of measure, connect leads to circuit, sync to remote device, take readings then diagnose, store and share results (mobile device sold separately)
• Horizontal orientation is comfortable for button and dial operation
• 115% larger color display for excellent viewing
• Bluetooth® remote display allows for one-tech testing, such as brake lights (mobile device sold separately)
• Stores customer information and test results, with the ability to share via email, text or social media (mobile device sold separately)
• CAT-III 1,000 V / CAT-IV 600 V hybrid safety rated
• Convenient test lead storage wrap with retention strap
• Built-in tilt stand and optional strap hanger (EEDMMAGSTRAP) for easy viewing
• LCD display: 40,000 count with 42-segment bar graph
• REC: Record mode stores minimum, maximum and average readings over a measurement period
• RANGE: manually select range or allow auto-ranging
• FUNCTION: toggle between functions on Ohm, TEMP and IG modes
• REL (Relative Mode): factor out lead resistance for improved low ohm measurements or compare readings to a known standard—can also be used for differential measurements
• CYL (Cylinder): selects the number of cylinders in IG modeHOLD: lock the reading on the display for hard to read locations or future reference
• PEAK-H (Peak Hold): capture signals spikes as fast as one millisecond to diagnose intermittent events
• Hz (Frequency): measure the frequency of sensors and signals
• AC mV and DC mV Ranges: additional 40 millivolt DC range with 0.01 mV resolution for improved accuracy when performing low voltage measurements
• DC V, AC V (DC Volts, AC Volts): measure the voltage of circuits, sensors and ABS wheel sensors
• TEMP (Temperature): measure temperature with included temperature probe
• AC/DC Current Functions: measure the parasitic draw from the battery
• IP, IG (Automotive Functions): measure RPM, Duty, Dwell, mS pulse width, Frequency
• AC/DC: manually select AC or DC measurement function
• Quickly Test Condition of Internal Fuses: determine the status of the internal fuses before you open the battery/fuse compartment
• Built-in Tilt Stand: tilt stand is built into the instrument housing, adding strength and integrity to the design
• Capacitance: measure the capacitance of condensers or capacitors found in today's hybrid automobiles
• Technical Support 888-382-6522