Overview
The OPTIBRIDGE 1210 is a mobile USB interface adapter for measurements, commissioning, parameterisation, maintenance and calibration of 2-wire and 4-wire HART® field devices via a PC, laptop or Windows tablet using PACTware or similar FDT/DTM programs.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Accessory for HART® capable field devices, e.g. SMARTPAT analytical sensors or any other HART® capable field instrument with 4...20mA output (passive)
- Can also be used as a HART® modem for accessing HART® enabled field devices without process interruption
- Connection to PC, laptop or Windows tablet with USB-A connector
-
User-friendly operation via PACTWare
- The required DTM for operation with PACTWare is freely available in the KROHNE Downloadcenter
-
Wide range of adapter cables available
- USB-B to USB-A: length of 1.8 m, for connection to a PC, laptop or Windows tablet
- M12 to VP: length of 1 m or 2 m, for SMARTPAT analytical sensors
- M12 to wire end ferrules: length of 1m or 2m, for any HART® capable field device
- M12 to Minigrabber®: length of 1.25 or 2.25m, for HART® modem operation
Specifications
Depending on selected device configuration
General information
| Product type | Interface cable |
| Product positioning | For HART® field devices |
| Ambient temperature | 0...+55°C / +32...+131°F |
| Power supply (VDC) | 5V DC (USB) |
| Output voltage (VDC) |
24V DC (depending on adapter cable used) |
US 13762 
GB 11437 
CA 9501 
AU 9447 
IE 4649 
NZ 3171 
BR 2726 
SG 1145 
