Overview
The OPTIMASS 7010 is a high-end single straight tube Coriolis mass flowmeter. It is particularly suitable for demanding process and dosing applications involving gases and shear-sensitive or viscous liquids, slurries, very aggressive media or media with a low flow velocity. The Coriolis meter features an integrated Modbus converter. This makes it the ideal solution for applications where a DCS or a PLC is already in use and extensive communication options and control functions are not necessary. By way of its Modbus interface the flowmeter integrates easily into existing controller systems. There is no need for a conventional signal converter. Purchase costs can be saved.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Single straight tube design
- No separate converter needed: Communication direct from meter
- Integrated temperature measurement
- Available in four sensor materials: titanium, stainless steel, Hastelloy® C or tantalum
- With sensor size DN80 / 3'' in titanium or Hastelloy® it is the largest single straight tube meter on the market
- Optional PED approved secondary pressure containment up to 100 barg / 1450 psig
- Virtually no pressure loss, easy to drain and clean
- Many options (heat tracing, purge port etc.)
- Immunity to crosstalk: resistant to installation and process effects
- Optional EtherNet/IPTM web-interface for configuration, maintenance and diagnostics
-
Specifications
Depending on selected device configuration
General information
Product type Flowmeter Product family name OPTIMASS Product positioning For advanced applications and process control Measurement principle Coriolis Measured media Liquids, Gases Operating conditions
Process pressure max. 100 barg/
1450 psigProcess temperature -40…+150°C/
-40…+302°FMaterials
Measuring tube Austenitic alloy (2.4602/Alloy 22), Duplex stainless steel (1.4462/318), Titanium alloy (3.7195/Ti-Grade 9), Tantalum (UNS RO5255 / RO5200) Process connections
Flange connections EN (1092-1): DN10…100
ASME (B 16.5): ½…4''
JIS (B 2220): 10…100AHygienic connections Clamp (DIN 32676): DN10, DN15, DN25, DN40, DN50, DN80
Clamp (ISO 2852): 25, 40, 51, 76.1
Tri-Clamp: ½'', ¾'', 1'', 1½'', 2'', 3''
Threaded ferrule (DIN 11851): DN10, DN15, DN25, DN40, DN50, DN80
Flange with groove (DIN 11864-2): DN10, DN15, DN25, DN40, DN50, DN80
Threaded ferrule (SMS 1146): 25 mm, 38 mm, 51 mm, 76 mm
IDF/ISS: 10A, 15A, 1'', 1½'', 2'', 3Approvals/Standards
Certificates/Approvals Ex ATEX, IECEx, EAC Ex, INMETRO, FM Certificates/Approvals Hygienic FDA, 3A, EHEDG, EC 1935/2004 Certificates/Approvals Marine ABS, BV, CCS, DNV, KR, LR, NK, RINA, CRS, IRS, PRS, RS Communication
Digital outputs Modbus RTU, EtherNet/IP™
US 7254 
BR 3133 
AU 1551 
TH 1529 
JP 1417 
SG 1152 
CA 1066 
VN 837 
