IMITOS 10W Dimmable LED Driver | 250mA Power Supply
The IMITOS LED Driver Dimmable 10W is a premium, high-efficiency constant current power supply engineered specifically for Malaysian residential and commercial electrical environments. Operating on a standard 220-240V AC input, it delivers a precise 250mA output (30-45V, Max 58V) to ensure flicker-free dimming performance and extend the lifespan of your 10W LED downlights, spotlights, and ceiling panels. Its ultra-compact 81.3mm form factor makes it an ideal, easy-to-install original replacement part for flickering or failed LED fixtures.
Full Description:
Are your premium dimmable LED ceiling lights beginning to flicker, buzz, or fail to power on entirely? In more than 90% of cases, the culprit isn't the LED chips themselves, but a worn-out or poor-quality transformer. The IMITOS LED Driver Dimmable 10W serves as the perfect, reliable original replacement part designed to restore your interior lighting to its peak performance.Engineered with advanced constant current technology, this dimmable electronic driver transforms standard household Alternating Current (AC) into the precise, smooth Direct Current (DC) that delicate LED configurations require. By ensuring a steady current output, it eliminates the dangerous "thermal runaway" cycle that prematurely burns out expensive lighting setups.
Ultra-Compact, Space-Saving Design
With a highly compact footprint measuring just 81.3mm x 35.2mm x 21.5mm, this driver easily slips through standard plaster ceiling cutout holes for eyeball and downlight housings. You will not have to cut away or damage your existing plaster ceiling boards to seat this unit securely. The lightweight housing allows it to rest safely on the ceiling framework without putting stress on the light fixtures.
Why Choose IMITOS Original Replacements?
Specification:Built Specially for Malaysia's Grid System
Electrical grids fluctuate, but your lighting shouldn't. This IMITOS 10W power supply is strictly optimized for Malaysia’s standard domestic voltage grid, running seamlessly on an Input Voltage of 220-240V~50/60Hz. It features highly adaptive internal surge protection mechanisms designed to absorb minor voltage spikes common in urban and suburban Malaysian residential areas, protecting both the driver and your integrated ceiling lights from sudden electrical failure.Smart Dimming & Smooth Performance
Unlike rigid, non-dimmable electronic components, this specialized model works beautifully alongside compatible triac or trailing-edge dimmer switches. It enables deep, smooth, and stepped dimming transitions without introducing frustrating micro-flickering or low-frequency audible hums. Whether you are creating a cozy, dim ambiance in your living room or setting up sharp, bright accent lighting in a retail display or commercial gallery, this driver translates your dimmer switch signals flawlessly.
Ultra-Compact, Space-Saving Design
With a highly compact footprint measuring just 81.3mm x 35.2mm x 21.5mm, this driver easily slips through standard plaster ceiling cutout holes for eyeball and downlight housings. You will not have to cut away or damage your existing plaster ceiling boards to seat this unit securely. The lightweight housing allows it to rest safely on the ceiling framework without putting stress on the light fixtures.
Why Choose IMITOS Original Replacements?
-
Flicker-Free Eye Care: Eliminates high-frequency flickering that induces eye strain, fatigue, and headaches during extended use.
-
Constant Current Regulation: A true 250mA output keeps the luminous flux completely uniform, even if domestic input voltage swings slightly.
-
Long-Term Cost Savings: Don't replace the entire downlight fixture. Simply swap out the old transformer with this IMITOS driver to instantly restore full operation at a fraction of the cost.
-
Model: LED DRIVER DIMMABLE
- Rate Power: 10W
- Input Voltage: 220-240V~50/60hZ
- Output Voltage: 250mA 30-45V Max:58V
- Output Current: 0.09A
- Size: 81.3*35.2*21.5mm
A: LED flickering usually occurs when there is an incompatibility between your dimmer switch and the LED driver, or if the driver itself is failing. Upgrading to a premium constant current unit like the IMITOS 10W Dimmable LED Driver (250mA) stabilizes the current and eliminates flickering.
Q2: Can I use a 10W dimmable LED driver with a 7W or 9W LED light?
A: It depends on the voltage and current matching. Because this IMITOS driver is a constant current unit supplying exactly 250mA within a 30-45V range, your LED light fixture must match the 250mA rating and fall within that voltage output window to function safely without overheating.
Q3: What does 250mA 30-45V mean on an LED transformer?
A: This means the driver actively regulates and supplies a constant current of 250mA. It automatically modulates its voltage between 30V and 45V to perfectly match the resistance load of your 10W LED board.
Q4: Is the IMITOS 10W LED Driver compatible with Malaysian home wiring?
A: Yes, absolutely. It is explicitly designed for Malaysia’s standard power grid with an input voltage profile of AC 220-240V at 50/60Hz, making it a safe, direct drop-in replacement.
Q5: How do I know if my LED driver is faulty or if the bulb is broken?
A: If your light flashes rapidly, clicks, hums, or shuts down after a few minutes, the driver is almost always the component failing due to heat wear. If individual LED chips are dark or burnt black, the bulb array itself is damaged.
Q6: What happens if an LED driver's output voltage says "Max 58V"?
A: "Max 58V" indicates the open-circuit maximum voltage. If no LED load is connected or if a wire breaks, the driver will safely cap its output voltage at 58V to prevent high-voltage electrical arcing or damage.
Q7: Can this 10W dimmable driver be used with a standard non-dimmable light switch?
A: Yes. A dimmable LED driver can comfortably operate on standard on/off wall switches at 100% full brightness. However, to utilize its dimming features, you must pair it with a compatible LED dimmer switch.
Q8: What are the dimensions of the IMITOS 10W LED Driver, and will it fit into downlight plaster holes?
A: The dimensions are 81.3mm x 35.2mm x 21.5mm. Its slim and short profile is explicitly optimized to fit easily through standard Malaysian downlight ceiling cutouts (typically 3-inch to 4-inch holes).
Q9: What is the difference between a constant current and a constant voltage LED driver?
A: Constant current drivers (like this 250mA unit) vary voltage to maintain a steady electrical current, which is essential for high-power downlights. Constant voltage drivers (typically 12V or 24V) keep voltage static and are generally used for LED light strips.
Q10: Is it easy to replace a burned-out IMITOS LED driver at home by myself?
A: Yes, it features simple input/output wiring. However, for absolute safety in Malaysia, always switch off your home's main DB board breaker before handling or clipping any electrical wires during installation.
.png)
