• ・A vacuum gripper that doesn't require an air source
  ・Operation possible by simply connecting an electrical wire connector
  　Can be used without an air source due to the built-in vacuum pump
  ・Unitization of the peripheral devices required for adsorption
  　The vacuum pump, atmospheric release valve, pressure monitor,
  　and cups have been integrated.
  ・Current consumption: Max. 64% reduction
  　Energy-saving operation possible via automatic/manual modes
  ・Lightweight: 556 g
  ・A wide variety of cup variations are available to support a wide range of
  　workpiece shapes.
  ・Standards: Conforming to ISO9409-1-50-4-M6
  
  ∗¹ These are the values under SMC measurement conditions when the gripper is in continuous mode (the vacuum pump working continuously) and may vary depending on the
  atmospheric pressure (weather, altitude, etc.) and the measurement method.
  ∗² May be restricted depending on the cup diameter, mounting orientation, or workpiece. Please use within the max. work load. Suction and transfer exceeding the max. work load may result in product failure and the dropping of workpieces.
  
  For more details, please click HERE.