View Catalogue / PrintPROLAB PATCH PANEL LABELS
Product Description
OVERVIEW
The PATCH and PUL label ranges are made from durable polyester with a special laser print receptive surface. A strong acrylic adhesive ensures long term bonding. Typically, they can be used for equipment/data outlets/patch panels etc.
These labels are designed for internal use, as a guide to their durability, the final printed (white) label has been successfully independently tested for 3000 hours accelerated UV ageing.
TESTING
The finished printed labels have been successfully independently tested
COLOUR OPTIONS
There is a small cost supplement for colour label packs.
SOFTWARE
Labacus® Innovator Lite/Basic/Advanced/Professional & Professional Satellite (for distant site printing of Professional output).
Product Specification
| Item Code |
Label
Dimensions
(mm)
|
Label
Per Sheet
|
Sheet
Per
Pack
|
Labels
Per Pack
|
Colour |
| DSSB-CIA-PATCH 4L-W | 220 x 9 | 20 | 10 | 200 | White |
| DSSB-CIA-PATCH 4L-Y | Yellow | ||||
| DSSB-CIA-PATCH 4L-B | Blue | ||||
| DSSB-CIA-PATCH 4L-R | Red | ||||
| DSSB-CIA-PATCH 4L-G | Green | ||||
| DSSB-CIA-PATCH 4L-O | Orange | ||||
| DSSB-CIA-PATCH 4L-BR | Brown | ||||
| DSSB-CIA-PATCH 4L-P | Purple | ||||
| DSSB-CIA-PATCH 4L-G | Grey | ||||
| DSSB-CIA-PATCH 6L-W | 126 X 9 | 40 | 10 | 400 | White |
| DSSB-CIA-PATCH 6L-Y | Yellow | ||||
| DSSB-CIA-PATCH 6L-B | Blue | ||||
| DSSB-CIA-PATCH 6L-R | Red | ||||
| DSSB-CIA-PATCH 6L-G | Green | ||||
| DSSB-CIA-PATCH 6L-O | Orange | ||||
| DSSB-CIA-PATCH 6L-BR | Brown | ||||
| DSSB-CIA-PATCH 6L-P | Purple | ||||
| DSSB-CIA-PATCH 6L-G | Grey | ||||
| DSSB-CIA-PATCH 8L-W | 146.5 X 10 | 24 | 10 | 240 | White |
| DSSB-CIA-PATCH 8L-Y | Yellow | ||||
| DSSB-CIA-PATCH 8L-B | Blue | ||||
| DSSB-CIA-PATCH 8L-R | Red | ||||
| DSSB-CIA-PATCH 8L-G | Green | ||||
| DSSB-CIA-PATCH 8L-O | Orange | ||||
| DSSB-CIA-PATCH 8L-BR | Brown | ||||
| DSSB-CIA-PATCH 8L-P | Purple | ||||
| DSSB-CIA-PATCH 8L-G | Grey |
*Also available in pack of 100 e.g. PATCH 8L(100)
PRINTING
Print via ordinary office laser printer.
TIP – TIME INTO PROFIT
- In addition to the “fine tune” options, to be extra sure about print alignment Labacus® Innovator software also includes a “printer calibration” option, this helps to match your specific printer to the software. This extra matching option is particularly helpful if you are printing onto small labels and/or need to include a lot of information on your labels.
-
The fine tune option adjusts the settings for the template (rather than the job) so next time you select the template the software will remember
your fine tune settings. - Wherever possible print onto a blank paper sheet first, then offer this up to the blank label sheet. If needed, fine tune adjustments can be made in the software dialogue box.
-
To remove labels from
sheet : fold sheet along the cut line, then flick up the labels.
| Test | Method Results |
| UV Weathering | ISO 4982 Part 3 Method A Cycle 1 - 500 hrs |
| Elevated Temperature* | MIL-STD-202G Method 108A - 2000 hrs @ 70°c to 100°c |
| Low Temperature | MIL-STD-810F Method 502.4 - 72 hrs @ -40° |
| H2S Sour Gas | Exposure (2% H2S) |
| Salt Mist Spray | EC60068-2-52 Test Kb Salt Mist (Cyclic) |
*Samples were subjected to 500 hours @ 70°C, followed by 500 hours @ 85°C followed by 1000 hours @ 100°C
Product Image
.jpg)
