SM-8150N Multi-Function Cleaning Machine

The machine consists of a cleaning system, rinsing system, drying system and filtration system.The machine use electricity and compressed air as energy, manually put the stencil /PCBA into the cleaning room, by touch screen set parameters of the cleaning, rinsing, drying and other related, press the start button, the stencil will be automatically cleaned, rinsed and dried.Automatically stop operation when the set cleaning process is finished and reset to achieve the next workflow.The machine is very convenient for cleaning stencils , improve production efficiency and quality.It belongs to a new type, high performance automatic cleaning equipment.The equipment uses water-based liquid cleaning agent and DI water for rinsing, without any safety risks, and no harm to personnel
 

• ◆High Pressure Spraying System for Cleaning Stencil with Water-based Cleaning Fluid

  ◆Double liquid tank, equipped with heating system, implementation needs cleaning-rinsing-drying

  ◆Cleaning process: cleaning - chemical isolation - rinsing (open loop/closed loop) - drying.

  ◆Preparation of advanced automatic touch screen operating software, Program parameters can be saved, Easy to use

  ◆The counting function of the system can automatically accumulate the number of cleaning stencils and the number of circulating filters

  ◆Liquid and the pump pressure can be displayed through the panel pressure gauge, feedback the equipment running status in time

  ◆Spray pressure is monitored by pressure sensor. If the pressure range is set, the alarm will be given

  ◆Direct reflux of liquid to reduce liquid consumption

  ◆Integral stainless steel body, strong and durable, resistant to acid, alkali cleaning fluid, etc   

  ◆Rinse water can be filtered by ion to achieve long time zero discharge

  ◆High-pressure fan + hot air drying, drying effect faster and thorough

  ◆Lower operating costs, only 50-120 ml of liquid is needed for each cleaning. After cleaning, compressed air is used to recover pipeline and pump residual liquid, which can reduce liquid consumption by 50%
  
   

  Dimension（mm）	L1300*W1400*H1850
  Applicable stencil size （mm）	L740 *W740 * H40(max) Special size to be customized
  Power supply	AC380V 50HZ
  Total power	30KW
  Gas source	0.4～0.7Mpa
  Source of water	0.2～0.4Mpa
  Exhaust port	Ø125
  Cleaning/Rinsing liquid tank volume	42L*2PCS（max）
  Optimum liquid usage	35L*2PCS
  Cleaning fluid isolation time	40S
  Clean time	3～8Min
  Rinse time	3～10Min
  Dry time	3～10Min
  Cleaning and rinsing methods	Left and right movable high pressure liquid spray cleaning
  Drying method	High pressure hot air shearing (optional super type)
  times of rinsing	1-99 times (settable)
  Cleaning liquid recovery filtration	Filtration of 5 microns (filtering microorganisms: red gum and contaminants)
  Rinsing liquid discharge filtration	Filtration of 5 microns  (filtering microorganisms: red gum and contaminants)
  Liquid heating temperature	Room Temperature to 60 ℃
  DI Water Supply	30～60L/min
  DI Water Pressure	0.2--0.4Mpa
  DI Water Access Connection Pipeline	3/4 inches
  noise	Less than50 decibels
  Net Machine Weight	550Kg