Description
Features
-
It can support star and chain networking and link-fault-pass through function.
-
E1 port accords with ITU-T G.703, G.704 and G.823, and the resistance of 75Ω unbalanced and 120 Ω balanced can be selected.
-
The serial port of node equipment can be selected from three working modes: RS232/RS422/RS485, and can adapt for a rate lower than 19.2kbps. Ethernet port can support 10M/100M, full-duplex/semi-duplex and adaptive modes, and accords with IEEE802.3 serial protocol.
-
The node equipment can transmit E1 time-slot of serial port data or Ethernet data by DIP switch setting.
-
The Ethernet port for IP upload of central convergence server accords with IEEE802.3 serial protocol.
-
When central convergence server collects serial port data, the serial port data can adopt three methods to communicate with higher equipment: virtual serial port software, the controls developed by our company, Socket communication.
-
When central convergence server collects serial port data, it can support three working modes: TCP server, TCP client and UPD. The working port, target IP and port are configurable.
-
Central convergence server supports two network management modes: server configuration application provided by our company and web Server. It can also support remote configuration and remote online upgrade.
Specifications
Sub & Main E1 port interface parameter:
- Channel capacity: 1 Channels
- interface rate: unframing/framing: N*64Kbps£¬N=0~31;
- Bit Rate: 2.048 Mb/s ±50 ppm
- Line Code: HDB3
- Line Impedance: 120 Ohm / 75 Ohm
- Connector: RJ-45 or BNC
- Pulse Shape: ITU-T G.703.
- Jitter Performance: ITU-T G.823
- clock: inter-clock, line-clock
- Output jitter<0.05UI
- Interface Rate: 10/100Mbps
- Duplex: half and full duplex self-adapt.
- Interface character: match IEEE802.3, IEEE802.1 Q(VLAN)
- Connector: RJ45, support auto-mdix
- MAC address capability: 4096
- DC: -48V (-36 to -72V);
- AC: 90 to 260 VAC ; 47 ~ 63Hz
- Power Interface: DC power terminal / AC socket
- Power Consumption: <5 W
- Operating temperature: 0 to 50 °C
- Storage temperature: -20; to +70 °C
- Relative humidity: 5% to 90% (25 °C no condense)


Ordering Information
AN-FE1-FE1+2COM
|
Serial port Time Slot Extraction and Insertion equipment, can transmit 1channel of N*64 K E1 to 1 channel of sub-E1 and 2 channels of RS232/RS485/RS422 serial ports.
|
AN-FE1-FE1+8COM
|
Serial port Time Slot Extraction and Insertion equipment, can transmit 1channel of N*64 K E1 to 1 channel of sub-E1 and 8 channels of RS232/RS485/RS422 serial ports.
|
AN-FE1-FE1+ETH
|
Ethernet Time Slot Extraction and Insertion equipment can transmit 1channel of N*64 K E1 to 1 channel of sub-E1 and 1 channel of Ethernet port.
|
AN-SER-C/S
|
E1 serial port convergence server can collect remote multiple nodes of serial port Time Slot Extraction and Insertion equipment by E1 and can collect 31 nodes of 19.2Kbps serial ports to 4 channels of Ethernet ports for transmission maximally.
|
AN-SER-C/E
|
E1 Ethernet convergence server can collect remote multiple nodes of Ethernet Time Slot Extraction and Insertion equipment by E1 and can collect 31 nodes of 64Kbps Ethernet ports to 4 channels of Ethernet ports for transmission at most.
|