Description
This extender can extend and connect one HD Source to four HD Displays or Projectors by four pieces of cat6/7 at the same time. The extending distance can reach 60m. This extender meets the needs of multi-route and low-cost HD Signal long distance transmission well. The production equipment company providing solutions for the following applications: such as noise, limited transmission distance and safety of the place, data center control, information distribution, conference room presentations and teaching environment and corporate training sites. Our devices offers solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
Features
-
One HDMI input distribute and extend to found Display by four cat6/7 cable. The extend distance can be up to 60m.
-
Support HDMI 1.3 protocol
-
HDCP 1.2 protocol compliant
-
Study EDID function，Support 3D
-
Support HDMI local output.
-
Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
-
Signal transmission: Single cat5e or cat6(recommended) cable up to 60 meters
-
Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
-
Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD.
-
Support up to 5metres AWG26 cable length between extender and source & sink device
-
No loss of quality
Specificatoins
|
Every port Length of CAT6
cable between Rx and TX
|
Up to 60 metres
|
|
HDMI Input
|
24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
|
|
Support audio format input
|
DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
|
|
HDMI Output
|
24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
|
|
Support audio format output
|
DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
|
|
Max transmission bandwidth
|
6.75Gbps
|
|
Input Video signal
|
0.5~1.5Volts p-p
|
|
Output DDC signal
|
5Volts p-p (TTL)
|
|
Input/Output HDMI1.3 cable distance
|
.≤20m AWG26 HDMI 1.3 standard cable
|
|
Max working current
|
400mA
|
|
Power adapter format
|
Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1 A
|
|
Operating Temperature range
|
(-15 to +55℃)
|
|
Operating Humidity range
|
5 to 90%RH (No Condensation)
|
|
Dimension TX (L x W x H)
|
155*105.2*25mm
|
|
Dimension RX (L x W x H)
|
82*69*25mm*4
|
|
Gross weight
|
0.7kg*4
|
|
BoxDimension(LXWXH)
|
250X220X60(mm)*3
|
Installation
-
Connect one HDMI 1.3 cable up to 20 meters between source device and TX Extender.
-
Connect one HDMI 1.3 cable up to 20 meters between sink device and RX Extender
-
Connect single cat6 or cat-6(recommended) cables up to 60 meters instead of HDMI cable between TX and RX Extender
-
Connect 5V power supply to the HDMI RX&TX Extender
-
Learning EDID, the display device connected to the TX, long press for 3 seconds EDID, status indicator light flashing, copy is complete, (note: if there is no access to display devices, will restore the system default EDID)
Ordering Information
|
AN-HDMI-UTP-EXT02
|
1 to 4 HDMI Extender over Cat5e/6 with splitter function, 1 master device and 4 slaves in set.
|
US 11936 
GB 10264 
CA 8358 
AU 7788 
BR 7055 
IE 5143 
IN 1386 
VN 1289 
