GL7-L/P

In Logic mode: sampling in 1MS/s (1μs) to 1S/hr. (1hr.).
It is able to measure the timing of the control signals as the relay
by this module. It allows to measure simultaneously both the timing
of control signals and an analog waveform using other analog input modules.
In Pulse mode: sampling in 10kS/s (100μs) to 1S/hr.(1hr.) It is able to count
the number of pulses for measuring such as the encoder output, a rotation
speed, or flow rate. It allows to measure simultaneously both the number of
pulses and an analog waveform using other analog input modules.

Application examples

GL7-L/P specification

Item		Description
Type of module		Logic or Pulse measurement module
Model number		GL7-L/P
Number of input channels		16 channels
Input method		All channels common ground, Simultaneous sampling, Circular connector (4ch/connector) (*1)
Sampling speed (interval)	Logic mode	1 M Samples/s to 1 Sample/h (1 μs to 1 hr.)
	Pulse mode	10 k Samples/s to 1 Sample/h (100 μs to 1 hr.)
Built-in RAM		2 million samples for each channels
Measurement mode		Logic input mode or Pulse input mode (*2)
Pulse input mode		Rotation count (RPM), Accumulating count, Instant count
Rotation count (RPM)	Function	Counting the number of pulses per sampling interval and then it is converted to RPM
	Span	50, 500, 5000, 50 k, 500 k, 5 M, 50 M, 500 M rpm Full Scale
Accumulating count	Function	Accumulating the number of pulses from the start of measurement
	Span	50, 500, 5000, 50 k, 500 k, 5 M, 50 M, 500 M counts Full Scale
Instant count	Function	Counting the number of pulses per sampling interval (count is reset at each sampling)
	Span	50, 500, 5000, 50 k, 500 k, 5 M, 50 M, 500 M counts Full Scale
Maximum input frequency		1 MHz
Maximum number of count		15 M counts (24 bits counter is used)
Input signal	Voltage range	0 to 24 V (common ground)
	Signal type	Contact (Relay), Open collector, Voltage
	Threshold	Approx. 2.5 V
	Hysteresis	Approx. 0.5 V (2.5 V to 3 V)
Filter		Off or On (-3 dB at 50 Hz)
External dimensions (W×D×H)		Approx. 49 x 136 x 160 mm (Excluding projections)
Weight		Approx. 700 g

*1

Input prove (RIC-10) is required to connect signals.

*2

The measuring mode is set in each module (16 channels). In Logic mode, up to 7 modules
(Up to 112ch.) can be attached to one main module. In Pulse mode, up to 2 modules
(Up to 32ch.) can be attached to one main modules. The maximum number of module
and channels are limited to up to 10 units with a mixed condition and 112 channels.