The TQC Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.

The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000 has eight cutting edges that can be changed easily by rotating the knife. The self positioning knife bracket of the TQC Cross Cut Adhesion Test KIT CC1000) ensures equal pressure on the cutting knife.

Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.

Knives and tape can be ordered as a spare as well

Features:

• Self-adjusting knife-holder ensures equal pressure on the cutting knife
• Round cutting knife with eight cutting edges for longer lifetime
• Ergonomically shaped handle
• Easy to change round cutting knife
• Wide range of knife sizes available for different coating thicknesses and substrates and according to different standards

ORDERING INFORMATION

Art. No. VF1839
TQC Cross Cut Adhesion Test CC1000, 6 blades, cutting distance 1 mm
Acc to ISO 2409 & ASTM D3359

Art. No. VF1842
TQC Cross Cut Adhesion Test CC1000, 6 blades, cutting distance 2 mm
Acc. to ISO 2409 & ASTM D3359

Art. No. VF1844
TQC Cross Cut Adhesion Test CC1000, 6 blades, cutting distance 3 mm
Acc. to ISO 2409

Art. No. VF1846
TQC Cross Cut Adhesion Test CC1000, 11 blades, cutting distance 1 mm
Acc. to ASTM D3359 <2009

Art. No. VF1847
TQC Cross Cut Adhesion Test CC1000, 11 blades, cutting distance 1.5 mm
Acc. to ASTM D3359 <2009