Tanks for solvents
Level measurement, point level and pressure measurement in the storage and transfer of solvents
 |
|
Process data
Measuring task
Level and pressure measurement, point level detection
Measuring point
Tank and pipework
Measuring range up to
10 m
Medium
Hydrocarbons, solvents
Process temperature
+20 … +120 °C
Process pressure
0 … +6 bar
Special challenges
Media with very low reflective properties
Application
Low viscosity solvents can degrade many types of plastics. This places increased demands on the process instrumentation. A separate level detection system is required for protection against overfilling. It increases plant safety and ensures protection of human health and the environment.
Your benefit
Reliable
Reliable protection against overfilling
Cost effective
Independent of product and process characteristics
User friendly
Simple to set up and maintenance-free operation
Recommended products
VEGAFLEX 81
Level measurement with guided radar in the solvent tank
- Different sealing and housing materials ensure long-term and maintenance-free operation
- Reliable measurement even with changing media and foaming
- The SIL qualification (SIL2/3) and the approval for substances hazardous to water (WHG) allow use as part of an overfill protection system or safety instrumented system
- Maintenance-free operation of the facility
Measuring range - Distance
75 m
Process temperature
-60 ... 200 °C
Process pressure
-1 ... 40 bar
VEGABAR 82
Pump pressure measurement with pressure transmitter in the pump line
- Robust ceramic CERTEC® measuring cell withstands pressure surges or vacuum shocks in the pump line
- The high resistance of the measuring cell and the various process fittings ensure long-term, maintenance-free operation
- Reliable level measurement qualified to WHG and SIL
Measuring range - Distance
-
Measuring range - Pressure
-1 ... 100 bar
Process temperature
-40 ... 150 °C
VEGASWING 63
Point level detection with vibrating level switch for overfill and dry run protection in the solvent tank
- Universally applicable for almost all liquids
- Additional safety thanks to glass feedthrough, which provides an additional process separation (Second Line of Defense)
- Simple setup without calibration
- Simple testing of the measuring system during operation via test button
Process temperature
-50 ... 250 °C
Process pressure
-1 ... 64 bar
Version
Standard
Hygienic applications
with gas-tight leadthrough
with tube extension
with temperature adapter
US 28296 
BR 24016 
GB 12609 
CA 9963 
AU 8698 
IN 5275 
IE 4579 
NZ 4042 
