• Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform on oscilloscope. Refer to a diagram shown at left for application. Specifications are same as those for Model 8112.
Example of Model 8112 BNC application
| Range | Measuring Ranges | Output Voltage | Accuracy | Frequency Response |
|---|---|---|---|---|
| 200mA | AC 0 - 500mA |
AC1V/A (1000mA→1V) |
±1.5%rdg±0.2mA | 50Hz - 1kHz |
| AC 0 - 1000mA | ±3%rdg±0.4mA | 40Hz - 10kHz | ||
| 2A | AC 0 - 20A |
AC100mV/A (20A→2V) |
±1%rdg±1mA | 40Hz - 1kHz |
| ±1.5%rdg±2mA | 1k - 10kHz | |||
|
20A |
AC 0 - 20A |
AC10mV/A (120A→1.2V) |
±1%rdg±0.01A | 40Hz - 1kHz |
| AC 20 - 60A | ±2.5%rdg | 50Hz - 10kHz | ||
| AC 60 - 120A | ±2.5%rdg | 100Hz - 10kHz | ||
| Conductor Size | Ø8mm max. | |||
| Frequency Characteristics | 30Hz - 100kHz (-3dB) | |||
| Safety Standard | IEC 61010-1 CAT II 100V Pollution Degree 2 | |||
| Withstand Voltage | 500V AC for 1 minute | |||
| Dimensions | 153(L) × 18(W) × 23(D)mm | |||
| Weight | 100g approx. | |||
| Accessories |
9057 (Carrying Case) Instruction Manual |
|||
US 7337 
BR 3156 
CA 1691 
AU 1684 
TH 1529 
JP 1422 
SG 1207 
MY 937 
